Product Description
Crown GWK-WP3000-NOSG-LW-XL replacement load wheel kit for electric pallet trucks is engineered with high-performance polyurethane tread rated at 97A nominal hardness, featuring a 3.25 inch diameter by 4.50 inch width. The kit includes pre-assembled ball bearing wheels, high-carbon steel axle, lubrication fittings, and Grade 8 fasteners. Compatible with Crown WP 3000 Series and other electric lift truck models requiring this specification.
Compatibility: Fits pallet jacks made by Crown, model WP 3000. Alternate model: WP3000. SKU: GWK-WP3000-NOSG-LW-XL
Specifications
Compatibility
| Truck Model Compatibility | Fits Crown WP 3000 Series (exact variant fitment not verified), compatible with selected electric pallet truck models |
Material & Construction
| Wheel Material | High-performance polyurethane tread, steel core |
| Finish | Polyurethane wheel surface, steel components corrosion protected |
Frequently Asked Questions
Q: What does the XL designation mean for GWK-WP3000-NOSG-LW-XL, and how does it differ from the standard NOSG variant?
A: GWK-WP3000-NOSG-LW-XL features 97A nominal hardness polyurethane (versus 95A in the standard model), a 3.25 inch diameter by 4.50 inch width specification, and enhanced Grade 8 fasteners with lubrication fittings. The XL provides superior wear resistance and longevity for high-cycle operations. Choose XL for heavy warehouses with continuous lift operations or demanding outdoor use. Standard NOSG-LW is adequate for moderate-duty applications.
Q: Are the 3.25 inch diameter and 4.50 inch width specifications of GWK-WP3000-NOSG-LW-XL compatible with all Crown WP 3000 equipment?
A: GWK-WP3000-NOSG-LW-XL dimensions are engineered to fit Crown WP 3000 Series specification. However, exact fitment is not independently verified across all serial ranges and regional equipment variants. Before purchase, compare the original worn wheel dimensions to the 3.25 inch diameter and 4.50 inch width specification. Inspect wheel mounting clearance in the truck frame; if custom modifications were made, contact the manufacturer for fitment confirmation.
Q: What is the load-carrying capacity of GWK-WP3000-NOSG-LW-XL wheels, and should I verify my truck rating?
A: GWK-WP3000-NOSG-LW-XL wheels are rated for typical Crown WP 3000 truck load specifications (verify on your truck nameplate for exact capacity). Do not exceed the truck load rating; wheels are designed as a system component. Overloading accelerates wear and can cause wheel failure. Check your truck manual or equipment nameplate for the maximum lifted and traveling load ratings. Higher durometer (97A) provides better durability under rated loads but does not increase capacity beyond the truck design limit.
Q: Does GWK-WP3000-NOSG-LW-XL include Grade 8 fasteners and lubrication fittings, and are these a requirement for Crown WP 3000?
A: Yes, GWK-WP3000-NOSG-LW-XL includes Grade 8 fasteners and lubrication fittings as standard components. Grade 8 provides higher shear strength and is recommended for high-cycle applications. Lubrication fittings allow periodic bearing maintenance if needed (though sealed bearings typically require none). Verify that your truck frame bolt holes match Grade 8 stud size before installation. If the original equipment used lower-grade fasteners, upgrade to Grade 8 to maximize wheel kit durability.
Q: What is the expected service life of 97A durometer wheels on GWK-WP3000-NOSG-LW-XL in high-cycle warehouse operations?
A: Under high-cycle warehouse operation (10+ hours daily on smooth concrete with consistent load), expect 18 to 28 months of service from 97A wheels. Higher durometer resists abrasion and maintains diameter longer than softer variants. Inspect every 6 weeks for flat spots, surface glazing, or polyurethane peeling from the steel core. Replace when diameter drops more than 0.30 inch or surface becomes slick. Cold storage (below 32 degrees F) extends shelf life; hot environments (above 120 degrees F) degrade polyurethane faster.
Q: Can I use GWK-WP3000-NOSG-LW-XL wheels as an upgrade to a truck originally equipped with standard 95A wheels?
A: Yes. GWK-WP3000-NOSG-LW-XL is a direct upgrade to standard 95A wheels if your truck frame and mounting points match Crown WP 3000 specification. The 97A durometer offers longer service life without modification to the truck. Verify hub bore and axle length match before installation. Do not mix wheel types; if upgrading, replace both wheels at the same time. The higher hardness does not increase truck capacity; it only extends wheel life under rated load cycles.