Product Description
GWK-WP3000XL-LW load wheel kit for Crown WP 3000 Series electric pallet jacks. Kit features two 97A polyurethane load wheels with steel axles, integrated sealed bearings, string guards, and all required installation fasteners. Designed for durability and compatibility as an aftermarket or OEM replacement.
Compatibility: Fits pallet jacks made by Crown, model WP 3000. Alternate model: WP3000. SKU: GWK-WP3000XL-LW
Specifications
Material & Construction
| Wheel Body Material | Molded polyurethane tread with steel core |
Part Numbers
| Manufacturer Part Number | GWK-WP3000XL-LW |
| OEM Part Number | GWK-WP3000-LW-XL |
| Cross-Reference Part Numbers | Equivalent to GWK-WP3000-LW-XL, Replaces OEM Crown WP3000 load wheel kit |
| Compatible Models | Crown WP 3000 Series electric pallet jack trucks |
Frequently Asked Questions
Q: What is the cross-reference part number for GWK-WP3000XL-LW?
A: GWK-WP3000XL-LW is equivalent to OEM Crown part number GWK-WP3000-LW-XL. Both kits contain two 97A polyurethane load wheels with steel axles and sealed bearings. Verify your machine nameplate before ordering to confirm the SKU matches your pallet jack serial range.
Q: Which Crown pallet jack models does this load wheel kit fit?
A: GWK-WP3000XL-LW fits Crown WP 3000 Series electric pallet jacks only. Do not use on WP 3040, WP 4000, or other Crown model lines. Check your machine model code on the nameplate before installation. Cross-compatibility with non-Crown brands is not supported.
Q: What tools and fasteners are included in the kit?
A: The kit includes two 97A polyurethane load wheels, steel axles, integrated sealed bearings, string guards, and all required installation fasteners. No additional bolts, washers, or hardware are needed. Fasteners are pre-selected for Crown WP 3000 geometry; do not substitute with metric or different gauge hardware.
Q: How long does a polyurethane load wheel typically last in service?
A: Under normal warehouse conditions (8-hour shifts on concrete), 97A polyurethane wheels last 2 to 4 years before tread flattening or sidewall cracking occurs. Life depends on load cycles, floor condition, and storage. Store wheels indoors in a cool dry area. High-heat or ozone-rich environments accelerate degradation; rotate jacks out of dock doors between shifts if possible.
Q: What is the rated load capacity for this wheel kit?
A: GWK-WP3000XL-LW is rated to support the full capacity of the Crown WP 3000 truck itself, typically 3,000 lbs at 24 inch load center. Do not exceed truck capacity. Overloading damages bearings and accelerates wheel wear. If your load approach extends beyond 24 inches, reduce load by approximately 10 percent for each additional 6 inches.
Q: Can worn wheels cause steering or braking issues?
A: Yes. Flat spots or severe tread wear reduce steering response and increase stopping distance on smooth floors. If wheels cannot roll freely by hand or show uneven contact patches, replace the kit immediately. Check wheels every 6 months; if any wheel diameter is less than 90 percent of new diameter, both wheels must be replaced as a pair to ensure balanced operation.