Product Description
Hyster HY 3013610 check valve engineered for electric lift truck hydraulic systems. OEM-grade cartridge-type valve, manufactured from SAE 1045 steel, suitable for rated pressures up to 2500 PSI and nominal flows of 12 GPM. Features nitrile rubber seals and 3/4-16 UNF thread mounting for compatibility with Hyster manifolds. Factory set cracking pressure 5 PSI. No superseded or cross-reference part numbers identified. Confirm exact fitment with Hyster OEM technical resources.
Specifications
Hydraulic
| Flow Capacity | Nominal flow capacity 12 GPM at 2500 PSI |
| Cracking Pressure | Factory set cracking pressure 5 PSI |
Material & Construction
| Body Material | Machined steel, SAE 1045 |
| Seal Material | Nitrile rubber hydraulic seal |
| Finish | Plain machined, no powder coating |
Part Numbers
| OEM Part Number | HY 3013610 |
Performance Specifications
| Cycle Life | Designed for 1 million cycles at rated hydraulic pressure |
Frequently Asked Questions
Q: What is the flow capacity and maximum pressure rating for the HY 3013610 check valve?
A: The HY 3013610 is rated for nominal flow capacity of 12 GPM at maximum operating pressure of 2500 PSI. Factory set cracking pressure is 5 PSI. This cartridge-type valve is designed for Hyster electric lift truck hydraulic manifold systems.
Q: What materials are used in the HY 3013610 check valve construction?
A: The valve body is machined from SAE 1045 steel for durability under high-pressure hydraulic loads. Seals are nitrile rubber hydraulic grade, suitable for standard mineral oil hydraulic fluids. The finish is plain machined without powder coating.
Q: Is the HY 3013610 compatible with Hyster manifold assemblies?
A: Yes. The HY 3013610 features 3/4-16 UNF thread mounting, which is the standard interface for Hyster electric lift truck hydraulic manifolds. Verify your manifold thread size and mounting location before ordering to confirm exact fitment.
Q: What is the typical service life and maintenance requirement for this check valve?
A: The HY 3013610 is designed for extended cycle life in continuous duty hydraulic circuits. Nitrile seals remain stable with standard mineral oil. Inspect seals periodically for wear or leakage during routine preventive maintenance. Replacement is necessary if the valve fails to hold cracking pressure or exhibits external leakage.
Q: Does the HY 3013610 have any cross-reference or superseded part numbers?
A: No superseded or cross-reference part numbers have been identified for the HY 3013610. This is an OEM Hyster-specific cartridge check valve. Use the exact SKU HY 3013610 when ordering.