Product Description
The IE9005 is an on-board industrial charger designed for electric lift trucks, offering 24VDC output at 15A continuous for lead-acid or lithium-ion battery systems. Features automatic charge control, onboard sealed mounting, and robust steel construction. Compatible with 24V electric pallet trucks and similar material handling equipment.
Specifications
Electrical
| Output Voltage | 24VDC nominal |
| Output Current | 15A continuous |
| Input Voltage | 110-120VAC single phase |
| Battery Compatibility | Lead-acid or lithium-ion battery packs with 24V system voltage |
Material
| Enclosure Material | Powder coated steel |
Part Numbers
| Part Number | IE9005 |
Performance
| Continuous Output Rating | 15A at 24VDC |
| Duty Cycle | Continuous duty output |
Frequently Asked Questions
Q: What battery types does the IE9005 charger support?
A: The IE9005 is designed for 24V electric lift trucks and pallet jacks with either lead-acid or lithium-ion battery systems. It provides 24VDC output at 15A continuous for both battery chemistries. Equipment from Crown, Toyota, Raymond, Yale, Hyster, and similar manufacturers can use this charger. Confirm your 24V system voltage before ordering.
Q: What are the IE9005 electrical specifications?
A: Output: 24VDC at 15 amps continuous (360 watts). Input: 110-120VAC single-phase. The charger features automatic charge control that manages current and voltage for optimal battery health across both lead-acid and lithium-ion battery packs. Continuous duty rating means no time restrictions on charging operation.
Q: What does automatic charge control do on the IE9005?
A: Automatic charge control monitors battery voltage and adjusts charging current to prevent overcharging and extend battery life. The system terminates charging when the battery reaches full capacity, protecting both lead-acid and lithium-ion chemistries. This reduces maintenance requirements and increases battery cycle life.
Q: What is the enclosure material and mounting design?
A: The IE9005 has a powder-coated steel enclosure designed for onboard sealed mounting directly to equipment chassis. The steel construction provides industrial durability against moisture and impact in warehouse environments. The powder coat finish resists corrosion from humidity and chemical exposure typical in material handling operations.
Q: Can the IE9005 be used on equipment originally specified for other charger part numbers?
A: The IE9005 is a direct OEM part number. Cross-compatibility with other charger models depends on matching the equipment original specification, connector type, mounting points, and voltage requirements. Always verify the original charger part number and mounting points before substituting with IE9005.