Product Description
SY41495 ignition switch for electric lift trucks. Keyed ON/OFF rotary control, 12VDC, SPDT contact configuration, 0.25 inch blade terminals. Overall length 3.46 inches, mounting diameter 25 mm. Supplied keyed alike. Zinc alloy body, copper alloy contacts. No cross-reference part numbers available.
Specifications
Electrical
| Voltage Rating | Rated for 12VDC primary control circuit |
| Current Capacity | 20A resistive load at 12VDC |
Part Numbers
| Manufacturer Part Number | SY41495 |
Performance
| Duty Cycle | Intermittent operation: 60 cycles/hour maximum |
Frequently Asked Questions
Q: What electrical specifications does the SY41495 ignition switch have?
A: The SY41495 is rated for 12VDC primary control circuits with a 20A resistive load capacity. It features SPDT (single pole double throw) contact configuration with 0.25 inch blade terminals. The duty cycle is intermittent operation with a maximum of 60 cycles per hour.
Q: What are the physical dimensions and mounting requirements for SY41495?
A: The SY41495 has an overall length of 3.46 inches with a 25 mm mounting diameter. It uses a keyed ON/OFF rotary control mechanism and is supplied keyed alike for standardized operation across multiple units.
Q: What materials are used in the SY41495 construction?
A: The SY41495 features a zinc alloy body for corrosion resistance and durability in material handling environments. The contacts are made from copper alloy, which provides reliable electrical conductivity and wear resistance under intermittent cycling.
Q: Which electric lift truck models are compatible with the SY41495 ignition switch?
A: The SY41495 is designed for 12VDC electric lift trucks. Verify that your equipment operates on 12 volts and uses a 25 mm mounting diameter with 0.25 inch blade terminals before ordering.
Q: What maintenance is required for the SY41495 ignition switch?
A: The SY41495 requires no routine maintenance. Inspect the switch periodically for corrosion on terminals and ensure the keyed mechanism operates smoothly. Replace the unit if electrical resistance increases or if the rotary control becomes difficult to turn.