Product Description
Interthor control rod IN 140.6474 is a carbon steel actuation component for manual pallet jack models K77 and K85, configured for clevis pin mounting, SAE 1045 material, plain finish, overall length 245 mm, 10 mm diameter, 8 mm bore diameter, M8 x 1.25 thread, and Brinell 160 minimum hardness. Cross-reference part numbers are not available.
Compatibility: Fits pallet jacks made by Interthor, model K77 and K85. SKU: IN 140.6474
Specifications
Material & Construction
| Material Grade | SAE 1045 Carbon Steel |
| Hardness | Brinell 160 minimum |
| Finish | Plain |
Dimensions & Specifications
| Overall Length | 245 mm |
| Shaft Diameter | 10 mm |
| Bore Diameter | 8 mm |
| Thread Specification | M8 x 1.25 |
| Mounting Type | Clevis Pin |
Part Information
| Manufacturer Part Number | IN 140.6474 |
| Compatible Equipment | Interthor Manual Pallet Jack Models K77 and K85 |
Frequently Asked Questions
Q: What is the IN 140.6474 control rod used for?
A: The IN 140.6474 is a carbon steel control rod (actuation component) used in Interthor manual pallet jack models K77 and K85. It provides the mechanical linkage for load actuation and pump operation during lifting cycles.
Q: What material is the IN 140.6474 control rod made from?
A: The control rod is manufactured from SAE 1045 carbon steel with a Brinell hardness rating of 160 minimum. This material provides excellent wear resistance and strength for repeated manual actuation cycles.
Q: What are the dimensions of the IN 140.6474?
A: Overall length is 245 mm, with a 10 mm shaft diameter, 8 mm bore diameter, and M8 x 1.25 thread specification. The rod uses clevis pin mounting configuration.
Q: Which pallet jack models is the IN 140.6474 compatible with?
A: This control rod is designed exclusively for Interthor manual pallet jack models K77 and K85. Verify your equipment model before ordering to ensure proper fit.
Q: How should I maintain the IN 140.6474 control rod?
A: Inspect regularly for bending, cracking, or corrosion, especially at the clevis pin interface. Keep the threaded section clean and free of debris. Wipe the plain finish dry; apply light machine oil if exposed to high humidity to prevent surface rust.
Q: What is the expected service life of the IN 140.6474?
A: Under normal operational conditions with proper maintenance, this control rod performs reliably for several years. Failure typically results from physical damage (bending, cracking) or thread stripping rather than material fatigue. Replace immediately if bent or damaged.