Product Description
Jet OEM spring pin 70B for PT2748 series manual pallet truck frame assemblies. Dimensional specifications: 4mm diameter by 30mm length roll pin configuration. Factory replacement component positioned at location 7 on PTX/JTX frame diagrams, providing pivot retention functionality for fork lift mechanisms.
Compatibility: Fits pallet jacks made by Jet, model PTX & JTX. SKU: JT PTX2748-086B
Specifications
Part Numbers
| OEM Part Number | JT9-PTX2748-086B |
| Compatible Equipment Models | Jet PT2748, PTX-2036, PTX-2048 series pallet trucks |
| Parts Diagram Reference | Position 7 on PTX/JTX frame assembly diagram |
Frequently Asked Questions
Q: What is the dimensional specification of the JT PTX2748-086B spring pin?
A: The JT PTX2748-086B is a 4mm diameter roll pin with 30mm length. These dimensions are critical for proper fit in the PTX/JTX frame pivot locations. Do not substitute with pins of different diameters or lengths.
Q: Where is this spring pin located on the Jet pallet jack frame?
A: The JT PTX2748-086B is positioned at location 7 on the PTX/JTX frame assembly diagram. It provides pivot retention functionality for the fork lift mechanism. Refer to your equipment parts diagram to verify exact location.
Q: What Jet models does the JT PTX2748-086B fit?
A: The JT PTX2748-086B is compatible with Jet PT2748, PTX-2036, and PTX-2048 series pallet trucks. Confirm your model designation against the compatible equipment list before ordering.
Q: What is the function of this roll pin in the frame assembly?
A: This roll pin serves as a pivot retention component, securing the fork lift mechanism to the frame. It allows controlled articulation of the forks while maintaining precise alignment during load cycles.
Q: When should the spring pin be replaced?
A: Replace the JT PTX2748-086B if the pin is bent, corroded, has lost material, or if the fork mechanism exhibits excessive play or misalignment. Roll pins are wear items and should be replaced during major frame rebuilds.
Q: Is this pin interchangeable with generic roll pins?
A: Use only OEM or OEM-equivalent 4mm x 30mm roll pins for this application. Generic substitutes may have different material hardness or surface finish, affecting pivot retention and frame stability.