Product Description
LF PN20203 is a Lift-Rite OEM bushing for manual pallet jack pivot assemblies. Direct fit for LCR55, LF50, LM50, and LU50 series manual pallet trucks. No OEM cross-reference or superseded part numbers documented. Suitable for lever arm and crank bar bushing replacements.
Compatibility: Fits pallet jacks made by Lift-Rite, model LCR55. SKU: LF PN20203
Specifications
Material
| Finish | As supplied by manufacturer, no additional coating |
Part Numbers
| OEM Part Number | LF PN20203 |
| Manufacturer Part Number | PN-20203 |
| Alternative Part Number | LFPN20203 |
| Compatibility - Model Series | Lift-Rite LCR55, LF50, LM50, LU50 manual pallet trucks |
Frequently Asked Questions
Q: What is the LF PN20203 bushing and which pallet jack models does it fit?
A: The LF PN20203 is a Lift-Rite OEM bushing for manual pallet jack pivot assemblies. It provides low-friction bearing support in the lever arm and crank bar assemblies. Direct fit for LCR55, LF50, LM50, and LU50 series manual pallet trucks.
Q: What material is the LF PN20203 bushing made from?
A: The LF PN20203 is manufactured from engineered plastic or bronze material designed to reduce friction between the pivot shaft and the lever or crank arm assembly. The exact material composition depends on manufacturer specifications and is supplied as standard finish without additional coating.
Q: What are the alternative part numbers for the LF PN20203?
A: The LF PN20203 is cross-referenced with manufacturer part number PN-20203 and alternative designation LFPN20203. All three designations refer to the same Lift-Rite OEM bushing for manual pallet truck pivot applications.
Q: What symptoms indicate the LF PN20203 bushing needs replacement?
A: Replace the LF PN20203 bushing if the lever arm or crank bar becomes difficult to move, exhibits grinding or squeaking sounds during operation, or if the pivot assembly develops excessive lateral play or wobbling. Worn bushings reduce lifting control and cause premature wear to the pivot shaft.
Q: How long does the LF PN20203 bushing last before replacement is needed?
A: The LF PN20203 bushing service life depends on use intensity and environmental conditions. Typical replacement occurs after 3 to 7 years of regular industrial use, or sooner if the pallet jack is used in high-cycle operations or stored in corrosive environments.
Q: Can the LF PN20203 bushing be used on Lift-Rite models other than LCR55, LF50, LM50, and LU50?
A: The LF PN20203 is confirmed compatible with LCR55, LF50, LM50, and LU50 Lift-Rite manual pallet truck series. No OEM cross-reference or superseded part numbers have been documented. Verify exact bushing bore diameter and shaft fit for any other model before ordering.