Product Description
Lift-Rite GWK-L50MS-LW L50 Mini Load Wheel Kit is a direct replacement assembly for Lift-Rite and Big Joe L50 Mini manual pallet jacks. Kit includes two 1.75 inch diameter steel load wheel assemblies, pre-mounted with bearings, axles, and fasteners in bronze finish. Fully assembled for straightforward installation. No cross-reference, supersedes, or equivalent part numbers identified.
Compatibility: Fits pallet jacks made by Lift-Rite, model L50 Mini / LCM50 / LCM4W. Alternate model: L50Mini/LCM50/LCM4W. SKU: GWK-L50MS-LW
Specifications
Material
| Wheel Material | Steel |
Part Numbers
| OEM Part Number | GWK-L50MS-LW |
| Compatible Models | Lift-Rite L50 Mini, Big Joe L50 Mini pallet jacks |
Performance
| Rated Load Capacity | Per original equipment; kit rated for OEM pallet jack load limit |
Frequently Asked Questions
Q: Are the steel wheels in GWK-L50MS-LW pre-assembled or do I need to assemble them?
A: The kit arrives fully assembled. Both 1.75 inch diameter steel wheels include factory-installed bearings, axles, and fasteners in bronze finish. You only need to remove the old wheels and install the new axle shafts into the jack frame. No additional parts or assembly required.
Q: Will GWK-L50MS-LW fit both Lift-Rite L50 Mini and Big Joe L50 Mini models?
A: Yes. GWK-L50MS-LW is compatible with Lift-Rite L50 Mini, LCM50, and LCM4W models, as well as Big Joe L50 Mini. However, verify your jack serial range because some alternate models (like L50Mini/LCM variants) may have different axle spacing. Always confirm the model number on your jack before ordering.
Q: Why would I choose steel wheels over polyurethane for my L50 Mini?
A: Steel wheels provide superior traction on wet, icy, or uneven surfaces, and they resist abrasion and heat better than polyurethane. Choose steel if your jack operates outdoors, on rough concrete, or in freezing conditions. Downside: steel wheels are louder, can mark finished floors, and do not absorb shock as well as poly.
Q: What is the rated load capacity of GWK-L50MS-LW?
A: The kit is rated for the original Lift-Rite L50 Mini pallet jack load limit per OEM specification, typically 5000 pounds. The steel wheel construction is rated for the same duty cycle as the poly version. Do not exceed the jacks rated capacity.
Q: How often do the steel wheels need replacement?
A: Steel wheels last 5-7 years or longer in typical warehouse use because they do not degrade like polyurethane. Lifespan depends on floor type and maintenance. Replace when bearings fail, wheels develop wobble, or axles bend. Inspect bearings quarterly and replace if they make grinding noises.
Q: What maintenance do steel wheels require?
A: Steel wheels require less maintenance than poly. Clean them monthly with a damp cloth to prevent rust on the axle shaft. Inspect bearings for noise or play every three months. Lubricate bearing seals annually with light machine oil. Check that the bronze-finished fasteners remain tight; re-torque if loose.
