Product Description
Complete steel load wheel kit (GWK-LCU-LW) for Lift-Rite LCU and LCU4W manual pallet jack, equipped with 1.75 inch diameter steel load rollers, bearings, axles, and fastener hardware. Compatible with select Big Joe and Lift-Rite models. Steel construction, designed for direct replacement of OEM load wheel assemblies.
Compatibility: Fits pallet jacks made by Lift-Rite, model LCU & LCU4W. Alternate model: LCU&LCU4W. SKU: GWK-LCU-LW
Specifications
Material & Construction
| Wheel Material | Structural steel |
Part Numbers
| Compatible Models | Lift-Rite LCU, Lift-Rite LCU4W |
Frequently Asked Questions
Q: Is GWK-LCU-LW compatible with Big Joe manual pallet jacks?
A: Yes. GWK-LCU-LW fits Lift-Rite LCU and LCU4W models. It also fits select Big Joe models that use the same load wheel assembly size and mounting pattern. Always verify your jack model number against the LCU or LCU4W series before ordering. Cross-reference your serial plate or jack nameplate to confirm compatibility.
Q: What is the difference between GWK-LCU-LW and GWK-LCUP-LW?
A: GWK-LCU-LW has steel load wheels, while GWK-LCUP-LW has polyurethane wheels at 70D Shore hardness. Steel wheels provide longer life on clean, smooth floors and handle heavy sustained loads. Polyurethane wheels offer better grip, quieter operation, and are preferred on wet or slightly uneven surfaces. Both kits have the same 1.75 inch diameter and fit the same jacks.
Q: What tools do I need to install GWK-LCU-LW on my pallet jack?
A: You will need a socket wrench set, adjustable wrench, and possibly a dead blow hammer to press the old axle out. The kit includes new axles, bearings, and fasteners. Lift the jack on blocks, remove the old wheel assembly by unbolting it, slide the new wheels and axles into place, and torque fasteners to manufacturer specs. Do not exceed the jack load rating during reassembly.
Q: How do I know if my load wheels need replacement?
A: Watch for flat spots, cracks, missing chunks, or chunking on the wheel surface. Listen for grinding or squealing when the jack is operated. If the wheels no longer roll freely or the jack pulls to one side, bearings or wheels are worn. Visually inspect for rust on steel wheels or hardening of polyurethane. Replace the entire kit if more than one wheel shows damage.
Q: Can I use GWK-LCU-LW for a 5500 pound load jack?
A: GWK-LCU-LW is rated for manual pallet jacks in the LCU series, which are typically 2500 to 4400 pound capacity jacks. Check your jack nameplate for the rated load capacity. Steel wheels can handle sustained heavy loading, but do not exceed the jack manufacturer us maximum rated load. Overloading the jack can cause wheel, bearing, and axle failure.
Q: How long do steel load wheels typically last?
A: Steel wheel kits like GWK-LCU-LW last 2 to 5 years with daily use on clean floors, depending on load weight, surface conditions, and maintenance. High-traffic warehouses may see failure in 12 to 18 months. Polyurethane wheels typically wear out faster, in 1 to 3 years. Regular inspection every 3 months and replacement of one failing wheel delays full kit replacement.
