Product Description
Complete Steering & Load Wheel Kit for Lift-Rite LCR55 Pallet Jacks
Complete Wheel Kit, (2) Ultra-Poly Load Roller, Assemblies (70D), (2) Poly Steer Wheel, Assemblies, W/ Bearings, Axles & Fasteners
Compatibility: Fits pallet jacks made by Lift Rite, model LCR55. SKU: GWK-LCR-CK
Specifications
Material
| Wheel Material | Ultra-Poly (70D) for load rollers and Poly for steer wheels |
Part Numbers
| Model Compatibility | Lift-Rite LCR55 Pallet Jacks |
Frequently Asked Questions
Q: What wheels are included in the GWK-LCR-CK complete steering and load wheel kit?
A: The GWK-LCR-CK includes (2) ultra-poly 70D load roller assemblies for the front wheels and (2) poly steer wheel assemblies for the rear wheels. All four are fully assembled with bearings, axles, and fasteners. The load rollers are 70D hardness for traction and durability; steer wheels are softer poly for turning responsiveness. This is a complete four-wheel replacement kit for Lift-Rite LCR55 pallet jacks.
Q: Can I purchase only the load wheel pair from the GWK-LCR-CK, or must I buy the complete kit?
A: The GWK-LCR-CK is a complete kit and does not break into separate load-wheel-only or steer-wheel-only purchases. If you need only load wheels, contact your supplier about the GWK-LCR-LW (load wheels only) or check if bulk pricing discounts apply when buying the complete kit. Do not attempt to mix wheel types or steer wheels as load wheels; this creates handling instability and tip hazards.
Q: What is the installation procedure for the GWK-LCR-CK, and how much downtime is required?
A: Installation requires lifting the LCR55 jack on secure blocks and removing all four axle fasteners using a socket wrench. Slide out old wheel assemblies and install new pre-assembled load and steer wheel units. Reinstall and tighten all fasteners to snug (do not over-torque, which can crush bearing seals). Total procedure time is 45-60 minutes for a technician unfamiliar with the task. Do not operate the jack until all fasteners are secure and wheels spin freely by hand.
Q: Are the load rollers and steer wheels different sizes on the GWK-LCR-CK?
A: Yes. The load rollers (front wheels) are larger diameter and higher durometer (70D ultra-poly) to handle the load and resist wear. The steer wheels (rear wheels) are typically smaller and softer poly compound to permit pivot and turning without dragging. Interchanging them will cause the jack to handle poorly and wear steer wheels excessively. Always install load wheels at the front, steer wheels at the rear, per the assembly diagram included in the kit.
Q: What floor types is the GWK-LCR-CK designed for, and will it work outdoors?
A: The GWK-LCR-CK is optimized for clean, smooth indoor warehouse floors, epoxy surfaces, and sealed concrete. The 70D ultra-poly rollers can handle light outdoor use but will wear faster on rough concrete, gravel, or oil-stained surfaces. The softer steer wheels are more prone to damage from sharp edges or debris. For heavy outdoor duty or factory floors, consult your supplier about alternative durometer options. Do not use the GWK-LCR-CK on uneven terrain or grades exceeding manufacturer load ratings.