Product Description
Load Wheel 3.25 X 3
Frequently Asked Questions
Q: What are the dimensions and load capacity of the SU S9801 load wheel?
A: The SU S9801 is a load wheel with a 3.25 inch by 3 inch configuration, designed for electric lift trucks in indoor material handling. Exact load capacity depends on truck design, wheel quantity, and axle configuration. Verify the truck load rating and wheel position before installation.
Q: Is the SU S9801 compatible with Yale, Hyster, and Raymond electric lift trucks?
A: The SU S9801 is designed for general electric lift truck applications. Cross-compatibility depends on the specific truck model, serial range, axle diameter, and mounting specifications. Verify the exact truck model and existing wheel configuration before ordering to confirm fitment.
Q: What symptoms indicate the SU S9801 load wheel needs replacement?
A: Replace the wheel if you observe flat spots, cracks, chunks missing from the wheel surface, or if the wheel does not roll freely. If the truck pulls to one side, steering feels heavy, or load tilts during operation, inspect wheels for uneven wear or damage. These conditions indicate wheel failure and reduced load control.
Q: What is the installation procedure for the SU S9801 wheel?
A: Raise and secure the truck frame with appropriate support blocks. Remove the axle bolt or fasteners holding the old wheel. Slide the old wheel off the axle. Clean the axle and bearing seat. Install the new SU S9801 wheel, ensuring it sits flush on the axle shoulder. Reinstall the fastener and torque to truck specifications. Test roll to verify smooth operation.
Q: How long does the SU S9801 wheel typically last in service?
A: In typical indoor warehouse use with moderate loads, the SU S9801 wheel lasts 18 to 36 months. Heavy loads, rough floors, and high-mileage applications reduce lifespan to 12 to 18 months. Inspect wheels every 6 months and rotate truck use patterns to extend wheel life.