Product Description
The GW 9111 load wheel is designed specifically for electric lift trucks, providing reliable performance and durability in demanding environments.
Specifications: 6.000 inch diameter x 2.750 inch width (6.000" x 2.750" | 6 x 2.75 wheel | 6 x 2-3/4 | 152.40mm x 69.85mm)
• Constructed with a poly 95A tread for excellent traction and non-marking application
• Features a robust steel core for enhanced strength and longevity
• Engineered for smooth operation and reduced wear on surfaces
This load wheel is compatible with various electric lift truck models, ensuring optimal functionality and performance.
Specifications
Material
| Tread Hardness | 95A Shore Durometer |
Part Numbers
| Manufacturer Part Number | GW 9111 |
| Cross-Reference Part Numbers | GW9111, 9111 |
| Alternate Part Number | GW9111-A |
Wheel Dimensions
| Outside Diameter | 6 |
| Width Side to Side | 2.75 |
Frequently Asked Questions
Q: What are the equivalent part numbers for the GW 9111 load wheel?
A: The GW 9111 is also available as GW9111 and has an alternate part number GW9111-A. Note that GW9111-A is a full assembly variant with integrated bearing system and may have different bearing specifications. Verify the bearing ID and installation method before ordering as a substitute. The basic GW 9111 is a wheel-only component without pre-installed bearing.
Q: What bearing size and type is required for the GW 9111 wheel?
A: The GW 9111 has a 35 mm bearing bore ID (1.378 inch). You must install a bearing with a 35 mm inner diameter; common choices are 6007RS or 6207RS sealed deep-groove ball bearings depending on axle diameter. Do not force a bearing with incorrect bore size, as this causes misalignment and premature failure. Confirm your axle diameter before selecting the outer bearing diameter.
Q: Is the GW 9111 non-marking and suitable for sensitive floor environments?
A: Yes. The 95A Shore Durometer polyurethane tread is formulated for non-marking application on clean floors, including polished concrete, tile, and painted surfaces. The 95A hardness provides traction without leaving residue. In wet or oily environments, verify floor conditions before deployment. If floor is compromised, traction may become too high, risking jack tipover.
Q: What are the exact dimensions and wheel specifications for the GW 9111?
A: Outside diameter: 6.000 inches (152.4 mm). Width: 2.750 inches (69.85 mm). Bearing bore ID: 35 mm (1.378 inch). Material: Polyurethane with steel core. Tread hardness: 95A Shore Durometer. This is a load-carrying wheel assembly; do not use for steering or directional control unless your jack design specifies it.
Q: How long does a GW 9111 wheel typically last in normal warehouse service?
A: Lifespan depends on usage, load, and floor conditions. In typical three-shift warehouse operations with 2-ton to 5-ton loads on clean floors, expect 12 to 24 months before noticeable wear. High-friction floors or sustained overload reduce life to 6-12 months. Inspect wheels monthly for flat spots and cracks. Replace when wear reaches visible depth loss or when bearing noise appears.
