Product Description
GW 9111-A is a complete load wheel assembly designed for electric pallet jack applications, featuring a robust 95A durometer polyurethane construction. This assembly includes a sealed bearing system, ensuring durability and maintenance-free operation for material handling equipment.
Specifications: 6.000 inch diameter x 2.750 inch width (6.000" x 2.750" | 6 x 2.75 wheel | 6 x 2-3/4 | 152.40mm x 69.85mm) | Bearing ID: 35mm (1.378 inch bore | 35.000mm ID)
• Made from high-quality 95A durometer polyurethane for enhanced durability
• Integrated sealed bearings for maintenance-free performance
• Compatible with various electric pallet jack models
This load wheel assembly is ideal for those seeking reliable and long-lasting components for their material handling equipment.
Specifications
Material & Construction
| Wheel Material Type | Polyurethane compound |
| Shore A Hardness Rating | 95A durometer |
Part Numbers & Compatibility
| Primary Part Number | GW 9111-A |
| Cross-Reference Part Numbers | GW9111, GP 9111-A, GP9111-A, 9111 |
Wheel Dimensions
| Outside Diameter | 6 |
| Width Side to Side | 2.75 |
Frequently Asked Questions
Q: How does the GW 9111-A assembly differ from the basic GW 9111 wheel?
A: The GW 9111-A is a complete load wheel assembly with pre-installed sealed bearing system, whereas GW 9111 is wheel-only and requires separate bearing installation. GW 9111-A is equivalent to GP 9111-A and GP9111-A. The GW 9111-A is plug-and-play for retrofit applications; no bearing sourcing or installation needed. Both have identical 6.0 x 2.75 inch dimensions and 95A durometer polyurethane.
Q: What is the bearing bore ID on the GW 9111-A and is it field-replaceable?
A: The GW 9111-A bearing ID is 35 mm (1.378 inch bore). The bearing is pre-installed and sealed as part of the factory assembly. It is not designed for field replacement. If bearing failure occurs, replace the entire GW 9111-A assembly. Attempting to press out the bearing risks damage to the wheel core and voids the warranty.
Q: Is the GW 9111-A assembly compatible with my pallet jack or lift truck?
A: The GW 9111-A fits most electric pallet jacks and walkie stackers requiring a 6.0 x 2.75 inch load wheel with 35 mm axle bore. Before purchase, verify three items: (1) your jack axle diameter matches 35 mm bore ID, (2) the wheel width of 2.75 inches fits your jack chassis without interference, (3) your jack nameplate specifies compatibility with this wheel size. Consult your jack manual or contact the manufacturer if uncertain.
Q: What maintenance is required for the GW 9111-A sealed bearing assembly?
A: The sealed bearing system requires no lubrication or maintenance during normal operation. Do not attempt to grease or repack the bearing; the seal is permanent. Inspect monthly for noise, resistance, or grinding sound. If the bearing becomes rough or noisy, the seal has failed and moisture or contamination has entered. Replace the entire assembly immediately to prevent axle damage.
Q: How do I remove and install the GW 9111-A on my jack?
A: Installation is straightforward: (1) Lift the jack and support it safely with blocks; do not work under a jack supported only by the hydraulic system. (2) Remove the cotter pin and axle nut securing the old wheel. (3) Slide the old wheel off the axle. (4) Slide the GW 9111-A onto the axle, ensuring the bore seats fully. (5) Replace the axle nut and secure with a new cotter pin. (6) Test wheel rotation for smooth operation before use. No tools required beyond a wrench and pliers.