Product Description
Load Wheel Assembly GW 674-A for Raymond 7400 Reach Pallet Trucks features a polyurethane tread (95A durometer), sealed precision bearings, machined steel core, and is compatible with OEM mounting and axle configurations. No cross-reference part numbers are available for this SKU.
Wheel Dimensions:
Wheel includes installed bearings
Specifications
Mechanical Specifications
| Wheel Material | 95A Polyurethane tread |
| Load Rating | Rated for use within OEM wheel capacity for Raymond 7400 Reach Truck series (refer to manufacturer rated capacity) |
| Polyurethane Durometer | 95A Shore hardness |
Part Numbers & Compatibility
| Manufacturer Part Number | GW 674-A |
| Compatibility | Fits Raymond 7400 Reach Pallet Truck series (excluding 6 x 4 closed toe configurations) |
Frequently Asked Questions
Q: Which Raymond reach truck models does GW 674-A fit?
A: GW 674-A is compatible with Raymond 7400 Reach Pallet Truck series. However, it does NOT fit 6 by 4 closed toe configurations. Before ordering, verify your truck serial number and configuration type. Contact Raymond service or consult your truck documentation to confirm whether your unit has an open or closed toe design. Attempting to install on incompatible configurations will cause axle misalignment.
Q: What is the load rating for GW 674-A?
A: GW 674-A is rated for the OEM wheel capacity specified for Raymond 7400 Reach Truck series. Refer to your trucks nameplate or the Raymond parts manual for exact load limits. Do not exceed the trucks rated capacity, as overloading will cause rapid tread wear, bearing failure, and safety hazards. Each wheel set must be rated to support the full truck plus load capacity equally.
Q: Are there equivalent or cross-reference part numbers for GW 674-A?
A: No cross-reference part numbers are available for GW 674-A. This is a proprietary assembly for Raymond 7400 Reach Truck series. Do not substitute with generic load wheels or parts from other manufacturers; they will not maintain proper axle alignment or load distribution. If GW 674-A is unavailable, contact Raymond directly for approved alternatives or used assemblies.
Q: What hardness rating does the 95A polyurethane tread provide?
A: 95A Shore durometer indicates medium-firm polyurethane ideal for warehouse floors and light outdoor use. This hardness provides excellent grip and wear resistance without excessive rolling resistance or heat generation. The tread will grip polished concrete and epoxy floors effectively. In temperatures below 32 degrees Fahrenheit, tread stiffness increases and grip may reduce slightly; this is normal and not a defect.
Q: How do I confirm the precision bearings are sealed before installation?
A: Sealed precision bearings have rubber or metal seals on both sides of the bearing assembly. Spin the wheel by hand before installation; it should rotate freely with a smooth, quiet bearing sound. Do not attempt to spin the wheel aggressively or apply side-to-side pressure; you could damage the seals. If the wheel does not spin freely or makes a grinding noise, do not install; contact your supplier for replacement.
Q: What maintenance schedule should I follow for GW 674-A?
A: Inspect wheels monthly for tread damage, wobble, or bearing noise. Check axle fasteners every two weeks to ensure they remain tight. Clean tread monthly with a damp cloth to prevent debris buildup that can affect rolling. Sealed bearings require no lubrication. Replace the complete assembly when tread wears below 80 percent of original diameter or if bearing damage is detected. Lifespan in continuous warehouse duty is typically 24 to 36 months.