Product Description
SU 2362-A Load Wheel Assembly is a replacement industrial wheel for Superior electric lift trucks, offered by multiple aftermarket suppliers as a direct OEM replacement. Specifications include axle-mount design, industrial-grade construction, and compatibility with electric lift truck load wheels. Suited for maintenance and repair scenarios requiring precise fit and durable performance.
Specifications
Part Numbers
| OEM Part Number | SU 2362-A |
| Cross-Reference Part Numbers | SU S2362-A, SUS2362-A |
| Equivalent/Interchange Part Numbers | Not explicitly listed; cross-check with SU S2362-A/SUS2362-A for compatibility |
Frequently Asked Questions
Q: What are the cross-reference part numbers for the SU 2362-A load wheel assembly?
A: The SU 2362-A is cross-referenced as SU S2362-A and SUS2362-A by various Superior distributors. These SKUs refer to the same assembly. When ordering, use your exact invoice part number. If your supplier does not stock SU 2362-A, ask if they have SU S2362-A or SUS2362-A in inventory as a substitute. Confirm dimensions and bore specifications before accepting an alternative.
Q: Will the SU 2362-A fit my Crown or Raymond electric lift truck?
A: The SU 2362-A is an aftermarket wheel assembly, not an OEM Crown or Raymond part. Fitment depends on your truck model and year. Cross-reference your truck manual or OEM parts diagram to find the correct Crown or Raymond load wheel part number, then verify that SU 2362-A matches the bore diameter, width, and pocket design. Do not assume compatibility without verification.
Q: What should I inspect if the SU 2362-A makes noise during operation?
A: Bearing noise is the most common issue. Inspect the assembly after removal. Spin the wheel by hand and listen for grinding or rough spots. Check for visible rust or contamination on the bearing races. If the noise is a click or pop at each wheel rotation, the bearing may be loose or the retainer clip may be missing. Tighten the axle nut incrementally (do not over-torque) or replace the bearing and clip assembly.
Q: Is the SU 2362-A suitable for outdoor or wet environments?
A: The SU 2362-A is rated for indoor warehouse and light outdoor use on smooth, dry surfaces. Prolonged water exposure or wet environments will corrode the metal hub and compromise bearing seals, reducing life to 6 to 12 months. If your trucks operate in wet conditions regularly, confirm seal type and material with Superior. Wash with fresh water and allow to dry after each wet-weather use to extend life.
Q: Can I use the SU 2362-A on both drive wheels and load wheels?
A: No. The SU 2362-A is designed as a load wheel assembly and is not rated for drive wheel duty. Drive wheels experience higher torque, require different bearing preload, and often include speed encoders or brake mounts. Installing SU 2362-A on a drive axle will cause bearing failure and loss of truck control. Always match wheel assemblies to their intended position on the truck.
Q: How do I confirm the SU 2362-A is correctly installed on my electric lift truck?
A: After installation, manually spin the wheels. Each should roll freely with no grinding or binding. Check that wheels do not rub on the frame or load wheel pocket. Test the truck under no load; it should move in a straight line without pulling left or right. If wheels are uneven in wear or the truck drifts, alignment may be off. Consult the truck manual for alignment procedures or contact a certified technician.
