Product Description
The SU S2400-XL-A is a high-performance XL Poly Load Wheel Assembly designed specifically for electric lift truck applications. This durable wheel features a robust polyurethane tread over a steel core, ensuring reliable load support and longevity.
Specifications: 3.250 inch diameter x 6.000 inch width (3.250" x 6.000" | 3.25 x 6 wheel | 3-1/4 x 6 | 82.55mm x 152.40mm) | Bearing ID: 25mm (0.984 inch bore | 25.000mm ID)
• Polyurethane tread for enhanced traction and wear resistance
• Steel core construction for maximum strength and durability
• Precision ball bearing pre-installed for smooth operation
This load wheel assembly is compatible with various electric lift trucks, making it an ideal choice for efficient material handling.
Specifications
Material
| Wheel Material | Polyurethane tread |
| Hub Material | Steel core |
| Finish | Polyurethane over steel |
Part Numbers
| Manufacturer Part Number | SU 2400-XL-A |
Frequently Asked Questions
Q: Is the SU S2400-XL-A compatible with all electric lift trucks or specific models only?
A: The SU S2400-XL-A is designed for electric lift truck applications with a 25mm bearing bore. Verify your trucks bearing ID before ordering. This wheel fits any lift truck requiring a 3.250 inch diameter x 6.000 inch width wheel with a 25mm (0.984 inch) bore. Check your OEM documentation or measure your existing wheel bore to confirm compatibility.
Q: What is the load capacity of the SU S2400-XL-A?
A: The SU S2400-XL-A is engineered for maximum load support with its steel core and polyurethane tread design. Actual load capacity depends on your trucks hydraulic system and axle rating. For exact load limits, consult your lift truck manual or contact the truck manufacturer.
Q: Can I replace just the polyurethane tread or do I need to replace the entire wheel assembly?
A: The SU S2400-XL-A is a complete wheel assembly with bonded polyurethane tread over steel core. The tread cannot be replaced separately. When the tread wears down, you must replace the entire assembly.
Q: How do I install the SU S2400-XL-A on my electric lift truck?
A: Remove the axle nut or fastener holding your old wheel. Slide the old wheel off the axle. Align the SU S2400-XL-A bearing bore with the axle and slide it on. Reinstall and tighten the axle fastener securely. Do not use an impact wrench as over-tightening can damage the bearing bore. Ensure the wheel spins freely before operating the truck.
Q: What bearing types are compatible with the SU S2400-XL-A 25mm bore?
A: The SU S2400-XL-A has a 25mm (0.984 inch) bearing ID. Standard roller or ball bearings in 25mm size will fit. If your axle uses tapered roller bearings, verify the cone diameter matches before installation. Incompatible bearing sizes will cause wobble or premature failure.
Q: Does the SU S2400-XL-A require maintenance, and how often?
A: Inspect the wheel monthly for tread wear, cracks, or uneven wear patterns. Clean debris from the tread to maintain traction. Check that the wheel spins freely without resistance or noise. If the bearing becomes noisy or the wheel wobbles, remove and inspect the bearing. Repack the bearing with grease if dry, or replace if damaged.