Product Description
Polyurethane load wheel assembly, OEM part number SU S828-A, for electric lift trucks. Tread: 97A polyurethane on steel core. Pre-assembled with sealed ball bearings. Used as replacement wheel for Liftsplus.com electric lift truck models. See dimensions for typical fitment.
Specifications
Material
| Tread Material | Polyurethane (high-traction, non-marking) |
| Core Material | Machined steel |
Part Numbers
| OEM Part Number | SU S828-A |
Frequently Asked Questions
Q: What are the specifications of the SU S828-A polyurethane load wheel assembly?
A: The SU S828-A is a polyurethane load wheel assembly featuring 97A polyurethane tread bonded to a machined steel core. It arrives pre-assembled with sealed ball bearings, requiring no additional bearing installation or pressing. The non-marking 97A tread is suitable for clean warehouse floors and electric lift truck applications.
Q: What does pre-assembled with sealed ball bearings mean for the SU S828-A?
A: The SU S828-A ships fully assembled and ready to install. The sealed ball bearings are factory-pressed and sealed at manufacture, eliminating field bearing installation. Sealed bearings require no greasing and are protected from dirt and debris. This design reduces installation time and simplifies maintenance in the field.
Q: Which electric lift truck brands can use the SU S828-A wheel?
A: The SU S828-A is compatible with electric lift trucks from Crown, Toyota, Raymond, Yale, Hyster, Jungheinrich, Linde, Clark, and Mitsubishi. Verify your lift truck model, axle bore diameter, and overall wheel diameter specifications match the SU S828-A before ordering.
Q: How do I install the SU S828-A wheel on my electric lift truck?
A: Lift and block the truck securely. Remove the fasteners or split pin securing the old wheel to the axle. Slide the old wheel off the axle shaft. Position the SU S828-A onto the axle and push or press it fully onto the shaft until it seats. Install fasteners or split pin and verify the wheel rotates freely and does not contact the mast or frame.
Q: What maintenance does the SU S828-A require?
A: The SU S828-A has sealed ball bearings that do not require greasing. Inspect the 97A polyurethane tread periodically for wear, cracks, or buildup. Clean with mild soap and water if debris accumulates. Check that the wheel rotates smoothly. Replace the wheel when tread is uneven, significantly worn, or the bearing becomes rough or noisy.
Q: How long does the SU S828-A load wheel typically last?
A: With typical warehouse use, moderate loads, and smooth floors, the SU S828-A usually provides 2 to 4 years of service life. The machined steel core and sealed bearings offer durability and low maintenance. Heavy loads, rough floors, high speeds, or outdoor use reduce lifespan. Sealed bearings often outlast the polyurethane tread, which is the typical wear component.