Product Description
Load Wheel Assembly
Specifications: 5.000 inch diameter x 2.875 inch width (5.000" x 2.875" | 5 x 2.88 wheel | 5 x 2-7/8 | 127.00mm x 73.02mm)
Specifications
Wheel Dimensions
| Material | |
| Outside Diameter | 5 |
| Inside Diameter | 3 |
| Width Side to Side | 2.875 |
| Tread Profile | 3/8 Radius |
| Bore Depth | 0.983 |
| Hub Width | |
| Bore Outside Diameter | 3.1491 |
Frequently Asked Questions
Q: What is the difference between the SU S9152-XL and SU S9152-XL-A?
A: The SU S9152-XL is the load wheel only (5.000 inch diameter x 2.875 inch width). The SU S9152-XL-A is a complete load wheel assembly that includes the wheel plus mounting hardware and bearings. Choose the assembly (A) if you need a ready-to-install unit; choose the wheel alone if you are replacing only the tire.
Q: Does the SU S9152-XL-A assembly come pre-lubricated?
A: Yes, the SU S9152-XL-A wheel assembly is pre-lubricated at the factory. However, verify bearing condition upon receipt. If the assembly will be stored more than 3 months before installation, inspect bearings for rust or contamination and apply additional grease if necessary before use.
Q: What bearing type is included in the SU S9152-XL-A assembly?
A: The SU S9152-XL-A assembly includes standard sealed ball bearings suitable for electric lift truck load wheel duty. The bearing bore outside diameter is 3.1491 inch and bore depth is 0.983 inch. Consult the product datasheet or contact support for the specific bearing SKU if bearing replacement is needed.
Q: Can I use the SU S9152-XL-A on different lift truck brands?
A: The SU S9152-XL-A wheel assembly is designed for electric lift trucks that use 5.000 inch diameter x 2.875 inch width wheels. It may fit Crown, Toyota, Raymond, Yale, Hyster, and other OEM models if the axle bore matches the 3.1491 inch OD specification. Verify your equipment documentation before purchase.
Q: What maintenance is required for the SU S9152-XL-A assembly after installation?
A: Inspect the wheel for debris and wear every 250 operating hours. Check bearing preload by spinning the wheel by hand; it should rotate freely with minimal side-to-side play. Re-grease sealed bearings annually or every 12 months of operation. Replace the entire assembly if bearings become noisy or develop play.
Q: How long does the SU S9152-XL-A assembly typically last?
A: Under normal service (2-4 hours per day, mostly dry indoor floors), the SU S9152-XL-A assembly typically lasts 3-5 years. Heavy use, wet conditions, or cold storage will reduce lifespan. Monitor wheel diameter; replace when worn below 4.875 inches or when bearing noise develops.