Product Description
Load Wheel Axle
Frequently Asked Questions
Q: What is the GW 213 used for and what type of jacks does it fit?
A: The GW 213 is a load wheel axle designed for manual pallet jack load wheel assemblies. It is compatible with standard pallet jacks that use a 0.625 inch bore diameter. Always verify your jack model and the diameter of your existing axle before ordering to confirm fitment.
Q: How do I determine if I need a replacement GW 213 axle?
A: Signs you need a replacement include grinding noises when the jack moves, wheels that do not rotate smoothly, visible bending or scoring on the axle shaft, or metal shavings in the wheel bearing area. Inspect the axle for straightness by spinning the wheel by hand. Any wobble or drag indicates replacement is needed.
Q: Is installation of the GW 213 a plug-and-play replacement?
A: The GW 213 is a direct axle replacement if your existing axle is the same diameter and length. You will need to remove the old axle by unbolting or pressing it out, then install the new axle into the load wheel assembly. Transfer existing bearings and seals to the new axle unless they are damaged. If unsure of dimensions, compare the old and new axles side by side before installation.
Q: What maintenance extends the life of the GW 213?
A: Inspect the axle quarterly for rust, dents, or scoring. Keep bearing surfaces clean and apply light machine oil at each bearing location every six months. Do not allow the wheels to drag or bind, as this accelerates axle wear. Replace immediately if you observe permanent deformation.
Q: Does the GW 213 have a cross-reference part number from other manufacturers?
A: No direct equivalent cross-reference is listed for the GW 213. Verify compatibility by matching the bore diameter, axle length, and wheel width to your existing assembly before ordering. Contact technical support with your jack model number for confirmation.