Product Description
Load Wheel Axle GW 222 is a precision carbon steel axle used for manual pallet jack load wheel mounting, fully interchangeable with GP 222/GP222 part numbers and designed to fit select models requiring a nominal 20 mm axle diameter. Features phosphate conversion coating for industrial durability.
Specifications
Material & Construction
| Axle Material | Carbon steel, precision machined |
| Finish/Coating | Industrial phosphate conversion coating |
Part Numbers
| Cross-Reference Part Numbers | Equivalent to GP 222, GP222 |
| Manufacturer Part Number | GW 222 |
| OEM Part Number | GW 222 |
| Supersedes/Interchange Part Numbers | GP 222, GP222 |
| Compatible Models | Manual pallet jack models using GW 222 load wheel axle (specific compatibility to be confirmed with reference diagram) |
Frequently Asked Questions
Q: What part numbers are equivalent to GW 222?
A: GW 222 is directly interchangeable with GP 222 and GP222. All three part numbers reference the same precision carbon steel load wheel axle with 20 mm nominal diameter. If you are replacing a load wheel axle from an older jack, confirm the axle hole diameter is 20 mm before ordering.
Q: Which manual pallet jack models use GW 222 axles?
A: GW 222 axles fit manual pallet jack models with 20 mm load wheel mounting holes. Compatibility is model-specific; verify your jack model against the manufacturer specification sheet or measure the existing axle diameter. If your jack currently has a different axle size (such as 25 mm or 16 mm), GW 222 will not fit.
Q: How do I install a GW 222 load wheel axle?
A: Remove the load wheel assembly by unbolting the existing axle from the frame. Slide the old axle out, then insert GW 222 into the mounting hole, ensuring it is fully seated. Re-bolt the assembly and test the wheel for smooth rotation with no binding. No additional tools beyond a wrench are required; installation is plug-and-play if the hole diameter matches 20 mm.
Q: What is the material and coating on GW 222?
A: GW 222 is manufactured from precision carbon steel with phosphate conversion coating applied for industrial corrosion resistance. The phosphate layer protects against rust in humid warehouse environments and is standard for manual pallet jack load wheel axles. Do not wire-brush or abrade the coating during installation, as this will compromise protection.
Q: What diameter load wheel bearings does GW 222 accept?
A: GW 222 is a 20 mm diameter axle designed to fit standard sealed ball bearing wheels used in manual pallet jack load wheel assemblies. The bearing bore must be machined or manufactured to accept a 20 mm shaft. If your wheel has a different bore size, the axle will not fit. Contact the wheel manufacturer or original equipment documentation to confirm bearing compatibility.
Q: How do I diagnose a failed GW 222 load wheel axle?
A: Signs of axle failure include rough or grinding wheel rotation, visible lateral play or wobble in the load wheel when stationary, or difficulty steering the pallet jack. To test, grip the load wheel rim and attempt to move it side-to-side; no play should be felt. If play is present, the axle may be bent or the bearing may be damaged. Replace the axle if bending is visible or if the wheel does not rotate smoothly after re-installation.