Product Description
Load Wheel Axle
Frequently Asked Questions
Q: How does GW 228 differ from GW 227?
A: GW 228 has a reinforced shaft and sealed cartridge bearings rated for 5600 lbs, compared to GW 227 at 5500 lbs. The bearing cartridges on GW 228 are pre-sealed and non-serviceable, so they cannot be re-greased. GW 228 is better for high-temperature environments or outdoor storage where exposure to moisture accelerates bearing wear on open-bearing designs.
Q: Can I replace a GW 227 with GW 228?
A: Yes, GW 228 is a direct replacement for GW 227 if your jack frame uses a 27-inch width and bolt pattern. No frame modification is required. The cartridge bearings on GW 228 are sealed, so you will not need to grease the axle after installation. Use the same socket and bolt torque specification (45-55 ft-lbs).
Q: What happens if I try to grease GW 228?
A: The sealed cartridge design prevents grease injection. If you force a grease gun into the bearing, you risk damaging the seal and forcing contaminants inside the cartridge. GW 228 requires zero maintenance lubrication. If the cartridge seals fail, you must replace the entire axle assembly—individual cartridges cannot be serviced in the field.
Q: How long does GW 228 last compared to GW 227?
A: GW 228 typically outlasts GW 227 by 40-60% in wet or outdoor environments because the sealed cartridges prevent water and salt ingress. In dry warehouse conditions, both last 3-5 years. GW 228 is the better choice for food processing, outdoor yards, or coastal facilities where corrosion accelerates bearing failure.
Q: What is the installation difference for GW 228?
A: Installation is identical to GW 227: remove the hub cap, unbolt from the frame (2 bolts per side), and slide out the axle. Do not attempt to disassemble or service the cartridge bearings. Reinstall using the same bolt torque (45-55 ft-lbs). No break-in period or grease application is needed—GW 228 is ready for service immediately.
Q: Is GW 228 compatible with Yale or Crown jacks?
A: Yes, GW 228 is compatible with Yale VL 58-03-00322 and Crown WA 2600 models if frame width matches (typically 27 inches). Confirm bolt pattern and axle diameter before ordering. The sealed cartridge design is superior to OEM open bearings on older Yale and Crown frames, extending axle life and reducing maintenance calls.