Product Description
Load Wheel Axle
Frequently Asked Questions
Q: What is the GW 235 load wheel axle compatible with?
A: The GW 235 is a manual pallet jack axle assembly. Verify your jack model and serial range against the parts diagram before ordering. Most manual jacks use this axle, but some older or specialty models have different bore sizes or threading. Contact your jack manufacturer with the model number to confirm cross-compatibility.
Q: How do I know if my axle needs replacement?
A: Replace the axle if: wheels do not spin freely and spin down consistently even after cleaning and lubrication; axle is visibly bent, cracked, or corroded beyond surface rust; wheels wobble side to side when you apply lateral pressure; or threads are stripped and wheels slip during load handling. A bent axle typically causes uneven wheel wear and pulling to one side.
Q: What tools are needed to install the GW 235 axle?
A: You will need a socket set or wrench to fit the axle fasteners (typically 1/2 inch or metric equivalent), a level work surface, and wheel dollies or jack stands to safely lift the pallet jack. Remove the old axle by unbolting from the frame. Slide the new axle through the frame and wheel hub bore, then reinstall fasteners and torque to manufacturer specification (typically 45-65 foot-pounds for manual jacks). Do not over-torque, as this can strip threads.
Q: Can I use the GW 235 axle as a direct cross-reference for other brands?
A: The GW 235 axle shares dimensions and bore specifications with many manual jack manufacturers, but cross-brand compatibility varies by model year and design. Check the OEM part number on your jack or the parts manual against GW 235 specs. Do not assume compatibility based on wheel size alone; verify bore diameter, thread pitch, and frame attachment holes match your application.
Q: What is the maximum load rating for jacks using the GW 235 axle?
A: The GW 235 axle itself is designed to support standard manual pallet jack loads (typically 2,500 to 4,000 pounds depending on the jack model and design). The axle does not determine the overall load rating alone; frame strength, wheel capacity, and hydraulic pump pressure also factor in. Refer to your jack nameplate for the maximum safe working load and never exceed it, as an overloaded axle will bend and seize.
Q: How often should the GW 235 axle be maintained?
A: Inspect the axle visually every 3 to 6 months or after 50 hours of use. Clean any dirt or debris from the axle bore and threads. Lubricate the axle and wheel hubs with a light machine oil or general-purpose grease at least quarterly to prevent corrosion and ensure smooth wheel rotation. Replace the axle if you cannot restore smooth wheel spin after cleaning and re-lubrication.