Product Description
GW 2400-XL Load Wheel by Liftsplus.com, designed for electric lift trucks and pallet jacks. Polyurethane wheel, 95A hardness, tandem assembly with four ball bearings, compatible with multiple OEM part references and interchangeable with GW2400-A, GP2400-XL. Machined carbon steel hub, 3 inch nominal diameter and width.
Wheel Dimensions:
Wheel DOES NOT include bearings
Specifications
Material & Construction
| Polyurethane Grade | 95A hardness polyurethane tread bonded to machined steel hub |
| Hub Material | Machined carbon steel per ASTM A108 |
| Finish | Hub finished with anti-corrosion phosphate coating |
Mechanical Specifications
| Wheel Material | Polyurethane, 95A durometer |
Part Numbers & Compatibility
| OEM Part Number | GW 2400-XL |
| Supersedes | Supersedes GW 2400, GW 2400-A |
| Interchange Part Numbers | Interchangeable with GW2400-A, GP2400-A |
Wheel Dimensions
| Material | |
| Outside Diameter | |
| Inside Diameter | |
| Width Side to Side | |
| Tread Profile | |
| Bore Depth | |
| Hub Width | |
| Bore Outside Diameter |
Frequently Asked Questions
Q: Does the GW 2400-XL include bearings, or do I need to supply them separately?
A: The GW 2400-XL does NOT include bearings. You must install your own ball bearings that fit the wheel bore. Verify your bearing inner diameter (ID) matches the wheel bore before purchase. This is a wheel-only assembly; bearings are sold separately.
Q: What wheels does the GW 2400-XL supersede, and can I use it as a direct swap?
A: The GW 2400-XL supersedes GW 2400 and GW 2400-A. All three are 95A hardness polyurethane tandem wheels with 3 inch nominal diameter. The GW 2400-XL is interchangeable with GW2400-A and GP2400-A if bearing sizing matches. Verify your current wheel bore and bearing type before replacing with the XL model.
Q: What does XL mean in the part number, and what is the actual diameter and width?
A: XL denotes a newer design or extended durability variant. Nominal dimensions are 3 inches diameter and approximately 6 inches width (tandem). Check your jack spec sheet for exact mounting width and bearing bore requirements; nominal specs do not guarantee fit on all equipment.
Q: Is the GW 2400-XL hub machined carbon steel, and how does that affect performance?
A: Yes, the GW 2400-XL has a machined carbon steel hub that provides excellent load distribution and bearing support. Carbon steel resists deformation and extends bearing life under heavy loads. This hub material is standard for high-duty commercial electric jacks and ensures long wheel life.
Q: What bearing type and size do I need to install on the GW 2400-XL wheel?
A: The search results do not specify the exact bearing ID for GW 2400-XL. Contact the supplier or manufacturer with your jack model number and current wheel to determine the correct bearing size. Installing an incorrect bearing size will cause binding, vibration, or failure.
Q: How does 95A durometer polyurethane on the GW 2400-XL compare to softer and harder wheels?
A: The GW 2400-XL is 95A durometer, which offers a balance of grip and wear resistance. It is softer than 97A wheels (better grip on smooth floors) but harder than 90A wheels (longer tread life). Use 95A for mixed-duty operations; switch to 97A if tread wear is excessive, or 90A if floor grip is poor.