Product Description
GWK-VJN-LW Load Wheel Kit (Nylon) by Valu Jack is a replacement load wheel assembly designed for Valu-Jack VJ 5500 and 6600 series manual hydraulic pallet jacks. Each kit contains two nylon load wheels with pre-installed precision bearings, steel axles, and all required fasteners for direct replacement. Wheel material is industrial-grade nylon; bearings are factory installed and constructed from hardened steel. Suitable for both left and right load arm positions. No available cross-reference or
Compatibility: Fits pallet jacks made by Valu Jack, model VJ6600. SKU: GWK-VJN-LW
Specifications
Material & Construction
| Wheel Material | Nylon |
| Bearing Material | Hardened steel |
Part Numbers
| Compatible with Models | Valu-Jack VJ 5500, Valu-Jack VJ 6600 |
Frequently Asked Questions
Q: Is GWK-VJN-LW compatible with both VJ5500 and VJ6600 series jacks?
A: Yes. GWK-VJN-LW load wheel kit is designed for both Valu Jack VJ 5500 and VJ 6600 series manual hydraulic pallet jacks. The kit contains two replacement load wheel assemblies. Before ordering, confirm your jack model by checking the serial plate on the frame.
Q: Does GWK-VJN-LW include steer wheels, or only load wheels?
A: GWK-VJN-LW includes only load wheel assemblies, not steer wheels. This kit replaces the two front load wheels on your jack. If you need a complete four-wheel replacement covering both load and steer positions, order GWK-VJN-CK instead.
Q: Are the precision bearings on GWK-VJN-LW pre-installed and sealed?
A: Yes. GWK-VJN-LW wheels arrive with factory-installed hardened steel bearings. The bearings are sealed and require no additional lubrication or setup before installation. All axles and fasteners are also included and pre-assembled for direct bolt-on replacement.
Q: Can I use GWK-VJN-LW in left and right load arm positions without modification?
A: Yes. The GWK-VJN-LW kit is symmetrical and suitable for both left and right load arm positions. No modification or orientation change is required. Both wheels are identical and interchange directly onto either arm.
Q: How do I remove and install GWK-VJN-LW load wheels?
A: Elevate the jack on a stand to lift the load arms clear of the floor. Locate the axle fasteners on the underside of each load arm. Remove fasteners using an appropriately sized wrench. Slide the old wheel assembly off the axle. Align the new GWK-VJN-LW wheel assembly onto the axle and install fasteners hand-tight first, then torque snugly. Verify smooth rotation before lowering the jack.
Q: What maintenance does GWK-VJN-LW require during its service life?
A: Inspect nylon wheels every three months for wear flattening, cracks, or tread damage. Spin wheels manually to verify bearing rotation is smooth and silent. Clean wheel wells and axles of dust and debris quarterly to prevent bearing contamination. Nylon wheels typically last 18 to 30 months in standard duty. Replace wheels when flattening or scoring exceeds 25 percent of original profile thickness.