Product Description
Raymond RA 632-050-002 polyurethane load wheel assembly for electric lift trucks, 95A durometer hardness, exact dimensional and compatibility data not available in accessible sources.
Specifications
Electrical
| Voltage Rating | N/A (mechanical load component) |
Hydraulic/Pneumatic
| Pressure Rating | N/A (mechanical load component) |
Material
| Wheel Material | Polyurethane, grade (95A hardness) |
Part Numbers
| OEM Part Number | RA 632-050-002 |
Performance
| Hardness (Durometer) | 95A |
Frequently Asked Questions
Q: What does the 002 suffix in RA 632-050-002 indicate?
A: The 002 suffix on Raymond OEM part numbers typically indicates a revision or alternative configuration of the base part. In this case, RA 632-050-002 is a variant of the RA 632-050 load wheel assembly. The suffix may denote a different bearing configuration, hub material, or compatibility specification. Verify the exact differences with your equipment documentation.
Q: What is the durometer hardness of the RA 632-050-002 polyurethane?
A: The RA 632-050-002 uses 95A durometer hardness polyurethane. At this hardness grade, the wheel provides adequate load capacity for electric lift trucks while maintaining traction on typical warehouse floors. This is a standard specification for Raymond load wheels.
Q: Is the RA 632-050-002 compatible with the same Raymond electric lift trucks as the RA 632-050?
A: The RA 632-050-002 is designed for Raymond electric lift trucks. However, because it is a variant (indicated by the 002 suffix), it may have specific compatibility requirements that differ from the base RA 632-050. Verify your truck model and serial number range against the part specification before ordering.
Q: What is an assembly versus a wheel-only load wheel part?
A: A load wheel assembly includes the polyurethane tread, steel core, and pre-installed bearings or hub components ready for mounting. A wheel-only part includes just the tread and core without bearings. The RA 632-050-002 is specified as an assembly, meaning bearings or hubs are included.
Q: How can I determine if the RA 632-050-002 is the correct replacement for my equipment?
A: Check your Raymond equipment documentation for the original part number or cross-reference. If your truck currently uses an RA 632-050 or RA 632-050-002, the variant will likely be compatible. When in doubt, verify the wheel diameter, tread width, hub bore, and bearing type match your equipment specifications.
Q: What maintenance does a 95A polyurethane load wheel assembly require?
A: Inspect the wheel regularly for tread wear, cracks, or flat spots. Clean debris from the tread if operating on dirty floors. If bearings are included in the assembly, ensure they rotate freely without binding or noise. Replace the wheel when tread wear becomes visible or the wheel loses full floor contact.