BK BHP1200

Frequently Asked Questions

Q: What seals are included in the BK BHP1200 seal kit?
A: The BK BHP1200 Marco Tiger Seal Kit contains a complete set of premium-grade nitrile rubber (NBR) and polyurethane seals. It includes O-rings and rod seals sized for Baker BHP1200 hydraulic pump assemblies rated at 70 Shore A hardness.

Q: What is the maximum hydraulic pressure rating for the BK BHP1200?
A: The BK BHP1200 seal kit is engineered for hydraulic systems operating up to 3000 PSI. This pressure rating is typical for manual pallet jack hydraulic pump and cylinder assemblies.

Q: Which Baker pallet jack models does the BK BHP1200 fit?
A: The BK BHP1200 is designed specifically for Baker manual pallet jacks using the BHP1200 hydraulic pump model. Verify your jack model number and pump bore and rod dimensions match before ordering.

Q: What material properties make nitrile seals suitable for the BK BHP1200 application?
A: Nitrile rubber at 70 Shore A hardness provides excellent resistance to mineral-based hydraulic oils, abrasion, and extrusion at 3000 PSI. The polyurethane components add durability in high-wear pump bore and rod positions.

Q: How often should the BK BHP1200 seals be replaced?
A: Seal replacement depends on equipment usage and hydraulic fluid condition. If the pallet jack shows slowed lift speed, drift, or oil seepage around the pump, seals should be replaced. Routine inspection annually or every 500 operating hours is recommended.

Q: Are there cross-reference part numbers for the BK BHP1200?
A: The BK BHP1200 is the OEM part number for Baker manual pallet jack pump seals. Check with your equipment records or pump identification tags for any alternative reference numbers specific to your jack serial range.