Product Description
Elbow 90 degrees
Frequently Asked Questions
Q: What are the dimensions and material of the ME -LT112-70 90-degree elbow?
A: The ME -LT112-70 is a 90-degree elbow fitting, likely steel or aluminum depending on application. Exact material and bore size must be verified against your hydraulic system schematic. The part designation indicates lift truck hydraulic component application.
Q: What pressure rating does the ME -LT112-70 elbow support?
A: Pressure rating depends on material and wall thickness. Standard lift truck elbows range from 1500 to 3000 PSI. Confirm the exact pressure specification for your equipment before installation to prevent system overpressure damage.
Q: Is the ME -LT112-70 compatible with both mineral oil and biodegradable hydraulic fluid?
A: Compatibility depends on internal seal material. If seals are Buna-N, mineral oil is standard. If seals are FKM or EPDM, biodegradable fluids are acceptable. Do not mix fluid types in the same system. Verify seal material with the OEM.
Q: How often should the ME -LT112-70 elbow be inspected for leaks or damage?
A: Inspect every 500 operating hours or monthly in high-use environments. Look for weeping at connection points or visible dents. If the elbow leaks, replace it immediately to prevent system pressure loss and equipment failure.
