Product Description
Mighty Lift ML B5 Traverse – OEM replacement component for manual pallet jack hydraulic unit ML55. Links hydraulic pump to fork carriage, ensuring correct lateral stability. Fabricated from high-strength carbon steel for units up to 5500 lbs capacity.
Compatibility: Fits pallet jacks made by Mighty Lift, model ML55. SKU: ML B5
Specifications
Material
| Body Material | High-strength carbon steel |
| Finish | Oil-coated as supplied |
Part Numbers
| OEM Part Number | ML B5 |
| Manufacturer Part Number | ML B5 |
| Compatible Equipment Model | Mighty Lift ML55 pallet jack |
Frequently Asked Questions
Q: What is the ML B5 and what does it do?
A: The ML B5 is a traverse bar, a hydraulic linkage component for manual pallet jack hydraulic units. It connects the hydraulic pump to the fork carriage and maintains correct lateral stability during lift operations. The ML B5 is the OEM replacement part for the ML55 pallet jack hydraulic assembly.
Q: What material is the ML B5 made from?
A: The ML B5 is fabricated from high-strength carbon steel for durability under the repeat stress cycles of manual pallet jack operation. The steel is oil-coated as supplied from the manufacturer to provide basic corrosion protection during storage and use.
Q: What capacity pallet jacks is the ML B5 rated for?
A: The ML B5 is rated for manual pallet jacks with up to 5500 lbs load capacity. This rating reflects the strength of the high-carbon steel construction and the hydraulic force it must resist without deformation or failure.
Q: Which pallet jack models use the ML B5 traverse?
A: The ML B5 is compatible with the Mighty Lift model ML55 manual pallet jack and equivalent units using the same hydraulic linkage configuration. Confirm your equipment model matches ML55 specifications before ordering, as traverse bar dimensions and pivot hole spacing vary by model.
Q: What happens if the ML B5 traverse is bent or damaged?
A: A bent traverse bar will cause lateral misalignment of the fork carriage and uneven load distribution during lifting. This can result in binding, difficulty raising the load, uneven wear on wheel assemblies, and potential hydraulic system stress. A damaged traverse should be replaced rather than attempted repair, as bending weakens the carbon steel and increases fracture risk.
Q: Does the ML B5 require any maintenance?
A: The ML B5 is a structural component that requires no routine maintenance beyond visual inspection for bending or cracking. Check pivot connections periodically to ensure fasteners remain tight, as vibration from normal operation can loosen hardware over time.