Product Description
Crown OEM nut CR 050008-015 for manual pallet jack handle assemblies. Designed to secure and adjust control rod and chain connector. Steel construction for durability. Compatible with Crown PTH manual pallet jack series. Reference: CR 050008-015. No cross-reference part numbers available.
Compatibility: Fits pallet jacks made by Crown, model CR 050008-015. Alternate model: CR050008015; CR 050008 015. SKU: CR 050008-015
Specifications
Material & Construction
| Surface Finish | Plain steel finish |
Part Numbers
| OEM Part Number | CR 050008-015 |
| Manufacturer Part Number | CR 050008-015 |
Frequently Asked Questions
Q: What manual pallet jack models use the Crown CR 050008-015 nut?
A: The CR 050008-015 is designed for the Crown PTH Series manual pallet jack. It secures control rod and chain connector assemblies in the handle mechanism. Verify your equipment serial falls within the PTH series range.
Q: What material is the CR 050008-015 nut made from?
A: The CR 050008-015 is a carbon steel nut with a plain steel finish. Carbon steel provides durability for fastening control rod and chain tension in manual pallet jack handles. The plain finish may rust if exposed to moisture; inspect periodically in humid environments.
Q: What thread size does the CR 050008-015 nut have?
A: Thread size and pitch for the CR 050008-015 are not specified here. Measure the control rod bolt on your Crown PTH manual pallet jack or contact Crown directly for exact thread diameter and pitch specifications.
Q: Can I use the CR 050008-015 nut on Yale or Toyota manual pallet jacks?
A: The CR 050008-015 is Crown OEM-specific. Do not assume it fits Yale, Toyota, or Raymond manual pallet jacks without verifying bolt thread size matches. Cross-reference the part number with the applicable OEM before substituting.
Q: When should the CR 050008-015 nut be replaced?
A: Replace the CR 050008-015 nut if it is stripped, cracked, or cannot maintain tension on the control rod or chain connector bolt. A loose nut in the handle assembly causes slack in the control linkage and loss of chain tension during lift operation.
Q: Is the CR 050008-015 different from the CR 050008-004 nut?
A: Yes. The CR 050008-015 is for Crown manual pallet jack handle and control assemblies. The CR 050008-004 is for the Crown WP 2000 Series electric pallet jack drive system. These nuts are not interchangeable.