Product Description
The GW 324 nylon steer wheel assembly is a high-quality OEM-grade replacement designed specifically for Liftsplus.com manual pallet jack models. This durable wheel features sealed ball bearings for enhanced performance and longevity, making it an ideal choice for heavy-duty applications.
Specifications: 8.000 inch diameter x 2.000 inch width (8.000" x 2.000" | 8 x 2 wheel | 8 x 2 | 203.20mm x 50.80mm) | Bearing ID: 0.75in (0.75 inch bore | 19.050 mm ID)
• Reinforced nylon construction for superior strength
• Engineered for compatibility with jacks rated to 5500 lbs
• Factory-sealed bearing configuration for minimal maintenance
This wheel assembly is perfect for replacing worn or damaged wheels on manual pallet jacks, ensuring smooth and efficient operation.
Specifications
Material & Construction
| Wheel Core Material | Glass fiber-reinforced nylon polymer |
Part Numbers
| Manufacturer Part Number | GW 324 |
Wheel Dimensions
| Outside Diameter | 8 |
| Width Side to Side | 2 |
Frequently Asked Questions
Q: What is the GW 324 steer wheel and what does it do?
A: The GW 324 is a nylon steer wheel assembly designed for manual pallet jacks. The steer wheel sits at the front of the jack and provides directional control while the load wheels support the weight. The GW 324 enables smooth steering and maneuverability on warehouse floors.
Q: What are the dimensions and specifications of the GW 324?
A: The GW 324 measures 8.000 inches diameter by 2.000 inches width (203.20mm x 50.80mm metric). The bearing bore is 0.75 inches (19.050mm ID). The wheel core is made from glass fiber-reinforced nylon polymer, providing excellent durability and resistance to shock loads.
Q: Why is the GW 324 made from nylon instead of polyurethane?
A: Nylon is ideal for steer wheels because it is harder and more rigid than polyurethane, providing precise directional control. Nylon also resists abrasion better during turning maneuvers. Glass fiber reinforcement adds strength, making the GW 324 suitable for heavy-duty applications with jacks rated to 5500 lbs.
Q: Which manual pallet jack models use the GW 324 steer wheel?
A: The GW 324 is compatible with manual pallet jacks from Crown, Toyota, Raymond, Yale, Hyster, Clark, and similar manufacturers with equipment rated to 5500 lbs. Verify your jack has a 0.75 inch axle bore and that the wheel width fits your jack geometry before ordering.
Q: What maintenance does the GW 324 require?
A: The GW 324 has sealed ball bearings requiring minimal maintenance. Inspect monthly for dirt accumulation, nylon cracking, or flat spotting. Wipe clean and verify the wheel rotates smoothly without noise. Do not lubricate the sealed bearing assembly. If the bearing becomes noisy or binding, replace the wheel assembly.
Q: How long does a GW 324 steer wheel last?
A: The GW 324 typically provides 3-5 years of service with normal warehouse use. Lifespan depends on steering intensity, floor conditions, and operator technique. Replace the wheel if you observe severe flat spotting, cracking in the nylon, uneven wear, or if steering becomes difficult or noisy.