Product Description
Ecoa EC HYD-01-6310 is an OEM hydraulic O-ring for manual pallet jack pump cylinder assemblies. Designed for Ecoa units, this nitrile elastomer O-ring provides a pressure seal on the release pin, ensuring leak-free hydraulic operation in manual pallet jacks. Rated for system pressures up to 3000 PSI. No approved cross-reference part numbers available.
Compatibility: Fits pallet jacks made by Ecoa, model EC HYD-01-6310. Alternate model: ECHYD016310; EC HYD 01 6310. SKU: EC HYD-01-6310
Specifications
Part Numbers
| OEM Part Number | EC HYD-01-6310 |
| Manufacturer Part Number | ECHYD-01-6310 |
Performance Specifications
| Operating Pressure (Typical) | Rated for hydraulic pressures up to 3000 PSI |
Frequently Asked Questions
Q: What is the EC HYD-01-6310 designed for?
A: The EC HYD-01-6310 is an OEM hydraulic O-ring designed for Ecoa manual pallet jack pump cylinder assemblies. It provides pressure sealing on the release pin to ensure leak-free hydraulic operation.
Q: What pressure rating does the EC HYD-01-6310 support?
A: The EC HYD-01-6310 is rated for hydraulic system pressures up to 3000 PSI. This higher pressure rating makes it suitable for heavy-duty pallet jack applications requiring sustained load holding.
Q: What material is the EC HYD-01-6310 made from?
A: The EC HYD-01-6310 is manufactured from nitrile elastomer. This material provides excellent resistance to standard hydraulic oils and chemical exposure common in material handling environments.
Q: Are there cross-reference part numbers for the EC HYD-01-6310?
A: Cross-reference numbers include ECHYD016310 and EC HYD 01 6310. No other approved equivalents exist. Always reference the Ecoa part number for correct fitment.
Q: Where specifically is the EC HYD-01-6310 located in the pallet jack?
A: The EC HYD-01-6310 seals the release pin in the pump cylinder assembly. This location is critical for maintaining hydraulic pressure and preventing fluid bypass during load holding cycles.
Q: When should the EC HYD-01-6310 be replaced?
A: Replace the O-ring if hydraulic fluid leaks from the pump assembly, the jack loses load height unexpectedly, or the release pin fails to hold pressure. Also replace if the O-ring shows visible cracks, hardening, or deformation.