Bearing - 1.850 OD, 0.75 ID, 0.551 Width
BS 6204 2RS-3/4
Couldn't load pickup availability
- Expert support & fitment help
- 30-day returns
- Fast Shipping
Compatibility
|
Make |
- |
|---|---|
|
Model |
- |
Visit our diagram page for part references to popular models
Product Description
OD: 1.850 or 47MM; ID: 0.75 inch or 19.05MM; Width: 0.551 inch or 14MM-10 per sleeve inch
Frequently Asked Questions
Q: What are the bore and outer diameter dimensions of the BS 6204 2RS-3/4?
A: This bearing has a 0.75-inch (19.05mm) inner diameter bore and 1.850-inch (47mm) outer diameter. The width is 0.551 inches (14mm). This is a hybrid metric-imperial size bearing used on specific pallet jack and material handling equipment models.
Q: Is the BS 6204 2RS-3/4 interchangeable with the standard BS 6204 2RS?
A: No. The standard BS 6204 2RS has a 20mm bore, while the BS 6204 2RS-3/4 has a 0.75-inch (19.05mm) bore. These are not interchangeable. The 0.75-inch bore fits equipment with 3/4-inch shafts only. Installing an incorrect bore size causes bearing failure or equipment damage.
Q: What is the outside diameter of the BS 6204 2RS-3/4?
A: The outer diameter is 1.850 inches, which equals 47mm. This matches the outer diameter of the standard 6204 bearing series. The combination of 3/4-inch bore with 47mm outer diameter is specific to certain equipment models.
Q: How many bearings come per sleeve of BS 6204 2RS-3/4?
A: Standard packaging includes 10 bearings per sleeve. This packaging is typical for industrial bearing distribution and pallet jack service parts.
Q: Which pallet jack models use the BS 6204 2RS-3/4 bearing size?
A: This 0.75-inch bore size is used on specific Crown, Toyota, Raymond, and other OEM models manufactured for mixed metric-imperial markets. The hybrid sizing is common on older equipment and certain regional variants. Always verify your equipment shaft diameter against the 0.75-inch bore specification before ordering.
Q: What does the 2RS seal provide on the BS 6204 2RS-3/4?
A: The 2RS designation indicates double rubber seals on both sides. These seals retain the bearing grease and prevent dust, moisture, and debris from entering the bearing cavity. This protection is essential for pallet jacks operating in warehouse, outdoor, or wet environments.