Product Description
OD: 1.250 inch or 32MM; ID: 0.472 inch or 12MM; Width: 0.394 inch or 10MM
Frequently Asked Questions
Q: What are the dimensions of the BS 6201 2RS bearing?
A: The BS 6201 2RS has an outer diameter of 1.250 inches (32MM), inner diameter of 0.472 inches (12MM), and width of 0.394 inches (10MM). It is slightly larger than the BS 6200 2RS and is commonly used in hand truck wheels and smaller pallet jack applications.
Q: How does the BS 6201 2RS compare to the BS 6200 2RS?
A: The BS 6201 2RS is larger and has higher load capacity than the BS 6200 2RS. The BS 6201 2RS is rated for approximately 380 lbs radial load compared to 310 lbs for the BS 6200 2RS. Check your equipment specifications carefully, as they are not interchangeable despite the similar construction.
Q: What is the operating life expectancy of the BS 6201 2RS?
A: In normal warehouse conditions with typical hand truck or small pallet jack use, expect 2000 to 3000 operating hours. The sealed design requires no maintenance. Replace the bearing if you notice binding, rough rotation, or noise.
Q: Which pallet jack models use the BS 6201 2RS bearing?
A: The BS 6201 2RS is used in hand trucks and smaller electric and manual pallet jacks from Crown, Toyota, Raymond, Yale, and similar brands. It typically appears in steering wheel or swivel caster assemblies. Verify your specific equipment model before ordering.
Q: Can the BS 6201 2RS be used in cold storage?
A: Yes. The 2RS rubber seals provide protection in freezing temperatures. Cold storage operation does not significantly reduce bearing life. The seal material remains flexible enough to function at temperatures down to -10°F.
Q: What happens if I use a BS 6201 2RS in equipment designed for a BS 6200 2RS?
A: The larger outer diameter of the BS 6201 2RS will not fit the housing designed for a BS 6200 2RS. Do not attempt to force a larger bearing into a smaller space. Always use the exact bearing size specified in your equipment documentation.