Product Description
This load wheel kit features durable 95A polyurethane assemblies, designed to enhance the functionality of pallet jacks by providing stability and efficiency. The kit includes necessary axles, bearings, and fasteners for easy installation, ensuring optimal performance in various environments. Options for different durometers include 92A wheels for quiet operation on display floors and 70D polyurethane wheels for enhanced longevity.
Compatibility: Fits pallet jacks made by Crown, model 15MT. SKU: GWK-15MT-LW
Specifications
Dimensional
| Bearing Bore | Not published in available sources. Remove and measure existing bearing on Crown 15MT to confirm. |
Material
| Wheel Material | Polyurethane (92A or 95A durometer, supplier-dependent) |
Part Numbers
| Manufacturer Part Number | GWK-15MT-LW |
| Cross-Reference Part Numbers | No direct OEM Crown cross-reference part number available for GWK-15MT-LW in official Crown sources. All major distributors and aftermarket sources reference GWK-15MT-LW as the definitive identifier for this kit, compatible with Crown Model 15MT; no supersession, replacement, or equivalent OEM Crown number listed for this SKU. Treat as aftermarket-specific kit for Crown 15MT. |
| Compatible With | Crown Model 15MT Electric Pallet Jack |
Frequently Asked Questions
Q: Is GWK-15MT-LW an OEM Crown part or an aftermarket equivalent?
A: GWK-15MT-LW is an aftermarket replacement part. Crown does not publish a direct OEM part number for this kit in official sources. All major distributors and parts suppliers reference GWK-15MT-LW as the compatible identifier for Crown 15MT pallet jacks. Verify your truck model (15MT) and axle bore diameter before ordering to ensure fitment.
Q: Can I get GWK-15MT-LW with 92A or 70D wheels instead of the standard 95A?
A: Yes. GWK-15MT-LW is available in 92A (quiet operation for display floors) or 70D (extended durability for rough industrial use). Confirm wheel durometer when ordering because polyurethane hardness affects rolling resistance, noise, and floor marking. 95A is the standard for general warehouse use on concrete.
Q: What tools and time are needed to replace GWK-15MT-LW wheels on a Crown 15MT?
A: Replacement takes 45–90 minutes with basic hand tools: socket wrench, bearing puller, and hammer. Remove the yoke pin or cotter pin securing the axle, slide the old wheel assembly off, install new bearings and axles from the kit, and secure. If axle is corroded or stuck, apply penetrating oil and use the bearing puller. Test for smooth rolling before returning to service.
Q: Will GWK-15MT-LW fit a Crown 15MT made before year 2000?
A: GWK-15MT-LW is designed for standard Crown 15MT trucks, but older units may have different axle bore sizes or mounting shoulders. Measure your existing axle diameter and wheel hub bore. If measurements do not match the new kit documentation, contact the supplier or Crown to confirm compatibility. Do not force a mismatched assembly.
Q: How often should I inspect or replace GWK-15MT-LW wheels during normal warehouse operation?
A: Inspect wheels monthly for flat spots, cracks, or unusual noise. Under typical 2–4 hour daily use, wheels last 24–48 months. Heavy loads (over rated capacity) or rough floors accelerate wear. If you notice uneven wear, flat spots, or the jack pulls to one side, wheel replacement is needed to prevent floor damage and operator safety issues.
Q: Does GWK-15MT-LW come with sealed bearings or do I need to grease them?
A: GWK-15MT-LW includes sealed ball bearings that require no field greasing. Maintenance is inspection only. If bearings show corrosion, play, or grinding sounds, they must be replaced. Sealed bearings prevent contamination but cannot be field-serviced; replace the entire wheel assembly if bearing failure occurs.