Product Description
This load wheel kit includes two 95A polyurethane assemblies, complete with axles, bearings, and fasteners for straightforward installation. Designed specifically for Toyota equipment, including the 6 HBW 23 model, these wheels offer high durability and resistance to wear, ensuring long-lasting performance. Their non-marking material prevents floor scuffs and provides quiet operation, making them suitable for various environments.
Compatibility: Fits pallet jacks made by Toyota, model 6HBE23. SKU: GWK-6HBW23-LW
Specifications
Part Numbers
| OEM Part Number | GWK-6HBW23-LW |
| Manufacturer Part Number | GWK-6HBW23-LW |
| Cross-Reference Part Numbers | No manufacturer’s cross-reference, supersession, or equivalent part numbers found for GWK-6HBW23-LW |
| Compatible Models | Toyota Model 6HBW23 electric pallet jack |
Frequently Asked Questions
Q: Which Toyota pallet jack models does the GWK-6HBW23-LW fit?
A: The GWK-6HBW23-LW is designed for Toyota 6HBW23 electric pallet jacks. Confirm your model by checking the equipment nameplate. The 6HBW23 designation must match exactly. Do not assume this kit fits other Toyota electric jacks such as 6HBW20 or 6HBW30 models, as hub bore and axle configurations differ.
Q: Is there a higher-durability upgrade option for the GWK-6HBW23-LW?
A: Yes. The GWK-6HBW23-LW-XL is the upgrade version, featuring 97A polyurethane instead of 95A. If your operation runs continuous cycles or operates on rough concrete, the XL variant offers extended wheel life. Both kits are direct replacements with identical installation.
Q: What are the specifications for the GWK-6HBW23-LW wheel material and construction?
A: The kit includes two wheel assemblies with 95A polyurethane treads molded over steel hubs. Each assembly comes complete with case-hardened alloy steel axles, precision bearings, and stainless steel fasteners. The wheels are non-marking, resistant to dust and moisture, and designed for low-noise operation in indoor environments.
Q: What installation steps should I follow for the GWK-6HBW23-LW?
A: Ensure the jack is on a level surface and fully lowered. Use a socket wrench to remove the cotter pins and axle retaining nuts. Slide the old wheels off the axles. Position the new assemblies and slide them fully onto the axles until they seat against the hub. Install and torque the retaining nuts (typically 45 to 55 ft-lbs), then install new cotter pins. Do not operate the jack until you have tested its movement and stability.
Q: How do I diagnose if my GWK-6HBW23-LW wheels need replacement?
A: Signs of wear include flat spots on the tread, visible cracks, hardening or discoloration of the polyurethane, and uneven rolling or grinding noise. Lift the jack and spin each wheel by hand. If rotation feels stiff, the bearings may be worn. Replace wheels if tread wear exceeds 20% of original thickness or if you observe any structural damage.