Product Description
This load wheel kit includes two durable 97A polyurethane wheel assemblies, complete with axles, bearings, and fasteners for a seamless replacement of worn-out pallet jack wheels. The high-quality material ensures minimal floor marking and promotes quiet operation, making it ideal for sensitive environments such as display floors and warehouses. This kit is specifically compatible with Raymond pallet jacks, ensuring a precise fit and improved maneuverability.
Compatibility: Fits pallet jacks made by Raymond, model 8400. SKU: GWK-8400-LW-XL
Specifications
Material & Construction
| Tread Material | Polyurethane, hardness 97A (XL Poly) |
| Hardness | Shore A 97 |
| Core Material | Steel core with polyurethane tread |
| Bearing Seals | 2RS (contact rubber seals both sides) |
Part Numbers
| OEM Part Number | GWK-8400-LW-XL |
| Compatible Equipment Models | Raymond 8400 Pallet Jack |
Performance
| Non-marking | Tread material designed for non-marking operation |
Frequently Asked Questions
Q: Is GWK-8400-LW-XL compatible with my Raymond 8400 serial number 124586?
A: Yes. GWK-8400-LW-XL fits all Raymond 8400 electric pallet jacks regardless of serial range. The 97A polyurethane tread and steel core are standard drop-in replacements. Verify that your axle bolts are in place and not corroded before installation, as stripped fasteners can cause fitment issues.
Q: Can I upgrade from GWK-8400-LW (95A) to GWK-8400-LW-XL (97A) mid-life?
A: Yes, you can swap to XL wheels at any time. The axle holes and bearing bores are identical. Remove old wheels and bearings completely, clean out debris, install new sealed bearings with 2RS seals, and install XL wheels. You do not need any additional hardware or modifications.
Q: What makes the steel core in GWK-8400-LW-XL more durable than nylon?
A: Steel cores resist permanent deformation from sustained heavy loads and rough surfaces, whereas molded nylon cores can flatten or warp over time. The 97A tread compound also resists abrasion better than 95A. Combined, these features extend wheel life and maintain consistent tracking and steering feel on the Raymond 8400.
Q: Do the 2RS sealed bearings on GWK-8400-LW-XL require any maintenance?
A: No. 2RS (contact rubber seals on both sides) bearings are sealed for life and cannot be regreased. Do not attempt to force new lubricant in. When a wheel becomes noisy or spins roughly, the bearing is worn and the entire wheel assembly must be replaced. Sealed bearings are included with the kit.
Q: What is the maximum load rating for GWK-8400-LW-XL wheels?
A: The wheels support the full capacity of the Raymond 8400 jack, which is typically 4,000 lbs total. Do not exceed this rating, as overloading causes bearing failure, axle bending, and loss of maneuverability. The 97A durometer tread provides better grip and wear resistance at full rated load.