Product Description
This load wheel kit provides a high-quality replacement solution for Toyota 8HBW30 pallet jacks, featuring two 97A polyurethane load wheel assemblies equipped with axles, bearings, and fasteners. These durable, non-marking wheels are designed for optimal performance in busy environments, delivering smooth and quiet operation while minimizing wear on your floors.
Compatibility: Fits pallet jacks made by Toyota, model 8HBW23. SKU: GWK-8HBW23-LW-XL
Specifications
Material
| Wheel Core Material | Machined steel, powder coated |
Part Numbers
| Cross-Reference Part Numbers | Replaces OEM 8HBW30-LW, supersedes GWK-8HBW30-LW, equivalent to GWK-8HBW30-LW-XL |
| OEM Part Number | 8HBW30-LW |
| Compatible Models | Toyota 8HBW30 Electric Pallet Jack |
Performance
| Duty Cycle | Designed for continuous warehouse service; compatible with vehicles rated for >4 hours daily operation |
Frequently Asked Questions
Q: Will GWK-8HBW23-LW-XL fit my Toyota 8HBW30 pallet jack?
A: Yes. GWK-8HBW23-LW-XL is the current superseding part number for the OEM 8HBW30-LW. It replaces both the older GWK-8HBW30-LW and GWK-8HBW30-LW-XL. All are mechanically equivalent. Always verify your jack serial range before ordering, as some very early models may have slight axle dimensional variations.
Q: What is the difference between 97A and 95A polyurethane wheels?
A: 97A wheels are slightly harder and more wear-resistant, making them better for heavy-duty continuous warehouse service. 95A wheels are softer and provide marginally better floor grip. For most electric pallet jacks operating in mixed warehouse conditions, 97A is the standard choice. Choose 95A only if your floor surface is unusually rough or you need maximum quiet operation on polished concrete.
Q: Does this kit include everything needed for installation?
A: Yes. The GWK-8HBW23-LW-XL kit includes two complete load wheel assemblies with axles, bearings, and all fasteners. No additional hardware is required. Installation is a plug-and-play replacement. Raise the jack with a load block or press to clear the floor, remove the existing axle fasteners, slide out old wheels, slide in new wheels, and secure fasteners.
Q: Can I replace just one wheel or must I replace both?
A: Replace both wheels at the same time. Mismatched wheel hardness or wear rates will cause uneven rolling, put stress on the mast pivot, and reduce steering response. This is a safety and longevity issue on electric units where load distribution is critical.
Q: What are the load and speed limits for these wheels?
A: These wheels are rated for continuous warehouse service and will support the full load capacity of the Toyota 8HBW30 jack, typically 3000 lbs or higher depending on mast height. Operating speed limit is the same as your jacks maximum travel speed, usually 1.2 to 1.5 mph. Do not exceed manufacturer jack limits.
Q: What is the expected wheel lifespan?
A: In typical warehouse service with 8 to 10 hours daily use, expect 18 to 36 months before polyurethane tread shows significant wear. Lifespan varies by floor type, load profile, and turning frequency. Inspect wheels quarterly for flat spots, cracks, or uneven wear. Replace when tread depth is visibly reduced or steering becomes notchy.