Product Description
This load wheel kit offers a robust solution for upgrading your Jungheinrich EJE120 pallet jack. It includes two 95A polyurethane load wheel assemblies, complete with axles, bearings, and fasteners, ensuring a smooth installation process. Designed for durability, these wheels are ideal for high-traffic environments, capable of withstanding daily wear and tear.
This load wheel comes with 25mm ID bearings and a wheel width of 4.5 inches. If your EJE120 model pallet jack uses 20mm id bearings and has a 4 inch width, use GWK-ELE35-LW
Compatibility: Fits pallet jacks made by Jungheinrich, model EJE120. SKU: GWK-EJE120-LW
Specifications
Material & Construction
| Polyurethane Hardness | Shore A95 (95A) |
| Core Material | Machined steel |
| Fastener Specification | Grade 8 metric bolt set |
Part Numbers
| Manufacturer Part Number | GWK-EJE120-LW |
| OEM Part Number | 51064639 |
| Cross-Reference Part Numbers | Replaces JU 51064639-KIT, equivalent to 51064639 |
| Compatible Models | Jungheinrich EJE120 electric pallet jack |
Frequently Asked Questions
Q: What bearing size does GWK-EJE120-LW use and is it compatible with my Jungheinrich EJE120?
A: GWK-EJE120-LW uses 25mm ID (inner diameter) bearings. Jungheinrich EJE120 models from 2010 onward use 25mm bearings as standard. If your EJE120 is older and uses 20mm ID bearings, this kit will not fit. Measure your current axle or consult the serial range documentation on your jack. If unsure, contact your equipment provider with your machine serial number before ordering.
Q: Does GWK-EJE120-LW include bearings and is installation plug-and-play?
A: Yes, GWK-EJE120-LW includes two 95A polyurethane load wheel assemblies, hardened steel axles, chrome steel bearings, and all Grade 8 metric fasteners. Installation is not fully plug-and-play. You must remove the old wheels, press off old bearings with a bearing puller, clean the axles, press on the new bearings and wheels, and torque fasteners to specification. The process takes 1 to 2 hours for both wheels.
Q: What is the wheel width and can I use wheels from other Jungheinrich models?
A: GWK-EJE120-LW wheels are 4.5 inches wide. Do not mix wheel widths or use wheels from other Jungheinrich models such as EJE116 or EJE225. Mismatched wheel widths cause uneven load distribution and steering problems. The EJE120 wheel pocket is dimensioned specifically for 4.5 inch wheels. Always verify part number and wheel width before installation.
Q: What is the 95A durometer rating and how does it perform in high-traffic areas?
A: 95A durometer polyurethane is medium-soft and ideal for high-traffic warehouse environments. It provides good traction, quiet operation, and absorbs shock from concrete floors. The wheels can withstand daily wear and tear and rough handling without cracking or flat-spotting quickly. Expect 4 to 7 years of service in typical warehouse use at rated load capacity. Inspect quarterly for signs of uneven wear or hardening.
Q: Are Grade 8 bolts included and do I need to use replacements of the same grade?
A: Yes, GWK-EJE120-LW includes Grade 8 metric bolts, which are high-strength fasteners rated for heavy-duty load-bearing. Always use Grade 8 or equivalent (10.9 metric class) replacements. Do not substitute with lower-grade bolts, as they will shear under repeated shock loading. Torque bolts to 25 to 30 foot-pounds. Check fastener tightness after the first 8 hours of operation and then every 6 months.