Product Description
GWK-EZV-LW load wheel kit is a direct, bolt-on replacement for the original load wheels on Atlas EZV manual pallet jacks. Kit includes two ultra-polyurethane (70D) load wheel assemblies with bearings, axles, and fasteners—engineered for compatibility and ease of installation on Atlas EZV pallet trucks.
Compatibility: Fits pallet jacks made by Atlas, model EZV. SKU: GWK-EZV-LW
Specifications
Material & Construction
| Wheel Construction | Solid urethane tread, 70D durometer (ultra-poly) |
| Load Wheel Assembly Materials | Polyurethane tread with steel core, steel axle, and steel fasteners |
Performance
| Expected Service Life | Not quantifiable from available sources—dependent on operating conditions and maintenance |
Regulatory
| Warning | Contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm (Prop 65) |
Frequently Asked Questions
Q: What is the difference between GWK-EZV-LW and the complete wheel kit GWK-EZV-CK?
A: GWK-EZV-LW contains only load wheels for the front of the Atlas EZV pallet jack. GWK-EZV-CK is a complete kit with both load wheels and steer wheels. Order GWK-EZV-LW if your steer wheels are still serviceable and you only need to replace the load wheels.
Q: Does GWK-EZV-LW include bearings, axles, and fasteners or are those sold separately?
A: GWK-EZV-LW load wheel kit is a complete bolt-on assembly. It includes two load wheel assemblies with bearings pre-installed, steel axles, and all necessary fasteners. No additional hardware is required for installation.
Q: What durometer rating does GWK-EZV-LW have and why does that matter?
A: GWK-EZV-LW uses 70D ultra-polyurethane (70 Shore A durometer). Higher durometer means greater hardness and wear resistance. 70D is suitable for continuous indoor and light outdoor service on smooth to slightly rough concrete. If your facility has severe flooring or outdoor terrain, this wheel may wear faster.
Q: Will GWK-EZV-LW fit Atlas models other than EZV?
A: No. GWK-EZV-LW is designed specifically for Atlas EZV model pallet jacks. Do not attempt to force-fit this kit to other Atlas models or other manufacturers. Verify your jack model before ordering.
Q: How do I know when GWK-EZV-LW wheels need replacement?
A: Replace the wheels if you observe: flat spots or visible tread wear, increased steering effort or unusual noise during operation, or if the jack no longer lifts smoothly. If the wheels appear cracked, split, or are noticeably smaller than when new, replacement is required.
Q: What is the typical installation time for GWK-EZV-LW and do I need factory training?
A: Installation takes 30 minutes to one hour with basic hand tools. Lift the jack on blocks, remove the old wheels using a wrench to unbolt the axles, install new assemblies by reversing steps, and torque fasteners securely. No special training is required, but ensure the truck is stable and do not work underneath it without proper support.