Product Description
Yale GWK-MPE060E-LW-XL Load Wheel Kit for MPE060E electric pallet jacks includes polyurethane load wheels (97A durometer), OEM-grade sealed bearings, hardened alloy steel axles, and Grade 8 zinc-plated fasteners. Kit designed for Yale MPE060E A896 Series compatibility, direct fitment for OEM axle dimensions.
Compatibility: Fits pallet jacks made by Yale, model MPE 060E. Alternate model: MPE060E. SKU: GWK-MPE060E-LW-XL
Specifications
Material & Construction
| Wheel Tread Composition | Polyurethane, rated 97A Shore Durometer |
Part Numbers & Compatibility
| Manufacturer Part Number | GWK-MPE060E-LW-XL |
| OEM Part Number | GWK-MPE060E-LW-XL |
| Compatible Equipment Models | Yale MPE060E (A896 Series) |
Frequently Asked Questions
Q: How does the GWK-MPE060E-LW-XL compare to the standard GWK-MPE060E-LW kit?
A: The LW-XL variant uses 97A Shore durometer polyurethane wheels instead of the standard 95A. The 97A rating increases load-carrying durability and extends wheel life in heavy-use environments. All other components, axles, fasteners, and bearings remain identical. Choose LW-XL for operations exceeding 8 hours daily or frequent full-load cycles. Choose standard LW for light to moderate duty.
Q: Is the GWK-MPE060E-LW-XL kit compatible with older Yale MPE060E models outside the A896 Series?
A: No. This kit is designed exclusively for Yale MPE060E A896 Series pallet jacks. Older production series have different axle geometry and bearing bores. Verify your jack was manufactured as A896 Series before ordering. Installing on incompatible models will result in misalignment, improper seating, or failure to install. Cross-reference your serial number with Yale documentation.
Q: What is the expected lifespan of 97A polyurethane wheels versus 95A?
A: The 97A wheels last 20-30 percent longer than 95A under identical conditions due to increased hardness and wear resistance. In a high-volume warehouse with 8+ hour daily operation, 95A wheels may last 12-18 months; 97A wheels may last 16-24 months. Actual lifespan depends on floor type, load consistency, and operator handling. Heavy racks or rough floors reduce life for both.
Q: Are Grade 8 zinc-plated fasteners required or can I use standard fasteners for replacement?
A: Grade 8 zinc-plated fasteners must be used. These provide superior corrosion resistance and tensile strength to prevent fastener failure under 6,000-pound loads. Substituting standard or lower-grade fasteners risks fastener shear and wheel separation during operation. Use only Grade 8 zinc-plated replacements from the original kit specifications.
Q: Do the sealed OEM-grade bearings in this kit require periodic inspection or replacement?
A: Sealed OEM-grade bearings are maintenance-free and do not require periodic greasing or replacement under normal use. Inspect bearing condition every 500 operating hours by checking for excessive wheel wobble or grinding noise. If noise or play develops, the entire load wheel assembly must be replaced; individual bearing replacement is not possible in the field.
Q: Can the hardened alloy steel axles handle shock loads or impact from dropped pallets?
A: The hardened alloy steel SAE 1045 axles are engineered for distributed load bearing, not impact shock. Dropping heavy pallets or running the jack over obstacles can bend or crack axles. Once bent, an axle cannot be straightened; the entire wheel assembly must be replaced. Operate within normal parameters: smooth floor travel at controlled speed. Do not exceed 6,000 pounds or subject the jack to impact.