Product Description
Load wheel replacement kit engineered for Crown SX 3000 Series electric pallet jacks, featuring dual 95A durometer polyurethane wheel assemblies with integrated bearing housings, hardened steel axles, and complete mounting hardware for front load wheel position replacement.
Compatibility: Fits pallet jacks made by Crown, model SX 3000. Alternate model: SX3000. SKU: GWK-SX3000-LW
Specifications
Material
| Wheel Core Material | Cast iron |
| Polyurethane Hardness | 95 Shore A |
Part Numbers
| OEM Part Number | GWK-SX3000-LW |
| Manufacturer Part Number | GWK-SX3000-LW |
| Compatible Equipment Model | SX 3000 Series Electric Pallet Truck |
Frequently Asked Questions
Q: Does GWK-SX3000-LW fit both Crown SX 3000 and SX3000 model pallet jacks?
A: GWK-SX3000-LW is designed for Crown SX 3000 and SX3000 series electric pallet jacks. Both model numbers refer to the same truck line. The kit includes dual 95A durometer polyurethane wheel assemblies with integrated bearing housings and hardened steel axles for front load wheel position replacement. Verify your truck nameplate before purchase. If your jack is a different Crown model (e.g., PWX, PT, or PX series), this kit will not fit.
Q: What symptoms indicate the front load wheels on my Crown SX 3000 need replacement?
A: Replace wheels if you observe visible wear flats on the tread, a spongy or soft feel when the jack is loaded, reduced traction causing slippage on inclined surfaces, or audible squealing from the front wheels during operation. Also watch for play or wobble in the front end when the jack is idle, which indicates bearing wear. If wheels have been in service over 24 months, start inspecting monthly for early wear signs.
Q: Are the integrated bearing housings in the GWK-SX3000-LW kit serviceable, or must I replace the entire assembly?
A: Integrated bearing housings in the GWK-SX3000-LW are sealed units and not serviceable. If the bearing fails or seals deteriorate, replace the entire wheel assembly. Do not attempt to repack or lubricate integrated bearings; doing so risks contaminating the seal and failing the bearing prematurely. The kit cost is competitive with attempting repairs. Keep spare wheels on hand for rapid replacement to minimize downtime.
Q: What tools and steps are required to install the GWK-SX3000-LW front load wheel kit?
A: You need a socket set, a rubber mallet, and potentially a wheel puller if wheels are tight. Lift the truck safely and secure it on blocks. Remove the cotter pins and axle nuts from both front wheels. Use a wheel puller if wheels do not slide off easily; do not pound excessively as this damages the axle. Slide new wheel assemblies onto the axles, ensuring bearing housings seat flush. Reinstall axle nuts and torque to truck manual specification (typically 40-55 ft-lb). Install new cotter pins. Test wheel rotation before returning truck to service.
Q: Is the GWK-SX3000-LW rated for the full load capacity of my Crown SX 3000 pallet jack?
A: GWK-SX3000-LW wheels are rated for the full load capacity of the Crown SX 3000 series, typically 4000-5500 lbs at 24-inch load center depending on your truck serial range and configuration. The 95A durometer polyurethane and cast iron cores are engineered for continuous duty operation. Do not exceed the truck nameplate capacity rating. If wheels wear unevenly or the truck pulls to one side, inspect the truck frame for damage that may have occurred during an overload event.