Product Description
The GWK-WP2300-LW-XL is a complete load wheel replacement kit for Crown WP2300 Series electric pallet jacks. The kit contains two 97A polyurethane load wheel assemblies, axles, bearings, string guards, and all fasteners, providing a direct-fit, maintenance-ready solution for original equipment replacement.
Compatibility: Fits pallet jacks made by Crown, model WP 2300. Alternate model: WP2300. SKU: GWK-WP2300-LW-XL
Specifications
Part Numbers
| Manufacturer Part Number | GWK-WP2300-LW-XL |
| Compatibility | Direct replacement for Crown WP2300 Series electric pallet jacks |
| Cross-Reference Part Numbers | No direct Crown factory part number cross-reference found; kit is an aftermarket direct-fit replacement for Crown WP2300 Series |
| Kit Contents | Two 97A polyurethane load wheel assemblies, axles, sealed ball bearings, string guards, fasteners |
| Wheel Durometer | 97A Shore A hardness (polyurethane) |
Warning
| Regulatory Note | California Prop 65 Warning: Cancer and Reproductive Harm |
Frequently Asked Questions
Q: Will the GWK-WP2300-LW-XL fit my Crown WP2300 electric pallet jack, and what does the kit include?
A: Yes, the GWK-WP2300-LW-XL is a direct replacement for Crown WP2300 Series jacks. The kit includes two 97A polyurethane load wheel assemblies, axles, sealed ball bearings, string guards, and all fasteners needed for installation. No modifications required if your jack is a WP2300 model.
Q: What is the difference between the 97A and 95A polyurethane wheels in the GWK-WP2300 line?
A: The 97A durometer (Shore A hardness) wheels in the GWK-WP2300-LW-XL are firmer and more wear-resistant than 95A wheels. Use 97A wheels for heavy sustained loads and rough floor conditions. Use 95A wheels when you need slightly better shock absorption on damaged or uneven flooring. Both are rated for Crown WP2300 capacity.
Q: How do I know if the load wheels have failed and need replacement with the GWK-WP2300-LW-XL?
A: Watch for flat spots or chunks missing from the wheel face, audible grinding or squealing when moving the jack, the jack veering to one side during operation, or loss of lifting power on one side. Spin each wheel by hand; it should rotate freely without binding. If wheels do not spin freely or if polyurethane is visibly deteriorated, replacement is necessary.
Q: What tools are required to install the GWK-WP2300-LW-XL kit, and how long does installation take?
A: You will need a socket set, adjustable wrench, and potentially a bearing puller for the axles. Do not use impact tools on bearing seals. Installation typically takes 30 to 45 minutes per wheel assembly if you are replacing both wheels. Ensure the jack is fully lowered and parked on a level surface before beginning. Wear safety glasses and gloves.
Q: What is the expected service life of the GWK-WP2300-LW-XL wheels, and what maintenance do they require?
A: Under normal warehouse conditions, polyurethane load wheels last 12 to 24 months depending on floor conditions and load frequency. The sealed ball bearings in this kit are maintenance-free. Inspect wheels monthly for flat spots, cracks, or excessive wear. Clean wheels and axles quarterly to remove debris that can accelerate bearing wear. Do not apply lubricant to the polyurethane surface as it will cause slipping.
Q: Is the GWK-WP2300-LW-XL equivalent to any OEM Crown part numbers?
A: The GWK-WP2300-LW-XL is not an OEM Crown part. It is an aftermarket direct-fit replacement designed specifically for Crown WP2300 Series jacks. No direct Crown part number cross-reference is documented. Verify your jack model is WP2300 before ordering. If you need an OEM Crown part, contact Crown parts support with your jack serial number.