Product Description
This load wheel kit is crafted specifically for the Raymond 8500 model, delivering exceptional durability and reliability for pallet jack replacement. It features two Durarun 95A polyurethane load wheel assemblies, complete with necessary axles, bearings, and fasteners. The 95A durometer polyurethane ensures optimal traction and smooth movement on various surfaces while minimizing noise and floor markings.
Compatibility: Fits pallet jacks made by Raymond, model 8500. SKU: GWK-8500-LW-XL
Specifications
Material & Construction
| Bearing Seal Type | Double-sealed (2RS) |
| Axle Material | Alloy steel, machined |
| Bearing Material | Chrome steel |
Part Numbers
| Manufacturer Part Number | GWK-8500-LW-XL |
| OEM Part Number | GWK-8500-LW-XL |
| Compatible Models | Raymond 8500 electric pallet jack |
Frequently Asked Questions
Q: Does the GWK-8500-LW-XL work with Raymond models other than 8500?
A: No. The GWK-8500-LW-XL is engineered specifically for Raymond model 8500 pallet jacks. The mounting hole pattern and axle geometry are designed for direct bolt-on fitment to the 8500 frame only. Do not attempt to force-fit this kit to other Raymond models, as it will not align correctly and may damage the chassis.
Q: What is the durometer rating of the wheels, and what does 95A mean?
A: The GWK-8500-LW-XL uses Durarun 95A polyurethane wheels. The 95A durometer rating indicates the hardness on the Shore A scale. At 95A, these wheels offer a balance between load capacity and floor protection, providing good traction on concrete and sealed warehouse floors while minimizing noise and floor marking. Softer compounds protect flooring but wear faster; harder compounds last longer but create noise.
Q: Can I install this kit without removing the pallet jack from service?
A: Installation requires removing the load wheels and axles from the jack frame. You will need a socket wrench set, a bearing press or hand-operated bearing puller, and approximately 30-45 minutes per wheel assembly. The double-sealed 2RS bearings are pre-installed, so no bearing installation is required. Remove fasteners, slide off the old wheel assembly, install the new Durarun wheel assembly, and torque fasteners to specification. Verify smooth rotation and alignment before returning to service.
Q: What is the axle material and how does it resist corrosion?
A: The axles are made from alloy steel, machined and finished per SAE 1045 specifications. Alloy steel provides excellent fatigue resistance under dynamic loading. The finish is not stainless, so these axles can corrode if exposed to moisture for extended periods. Store the kit in a dry environment and apply a light machine oil to axles before installation if the warehouse environment is humid or involves regular floor washing.
Q: What is the expected lifespan of the GWK-8500-LW-XL wheels in a high-traffic warehouse?
A: Under typical warehouse conditions with 8-10 hours daily use on smooth concrete, expect 18-24 months of service life. Lifespan depends on floor surface texture, load weight consistency, and speed of operation. Rough or outdoor concrete accelerates wear. Inspect wheels quarterly for flat spots, cracks, or edge rounding. Replace wheels when polyurethane thickness reduces by more than 25% or if you observe reduced traction or increased operational noise.
Q: Are the double-sealed bearings serviceable or do they need replacement?
A: The 2RS (double-sealed) bearings are not designed for field servicing. They arrive pre-packed with grease and sealed. If a bearing fails during operation, you must replace the entire wheel assembly—do not attempt to clean or re-grease sealed bearings, as this damages the seals. Keep spare wheel assemblies on hand for critical equipment. Do not attempt to over-pack grease or add lubricant.