Product Description
This load wheel kit serves as an ideal replacement part for pallet jacks, featuring two Ultra-Poly 70D wheel assemblies complete with bearings, axles, and fasteners. The wheels are constructed from durable 70D polyurethane, providing longer-lasting performance than standard 92A material while ensuring quiet and easy mobility, making them suitable for noise-sensitive environments.
Compatibility: Fits pallet jacks made by Uline, model H-1785. Alternate model: H1785; H 1785. SKU: GWK-1785-LW
Specifications
Material & Construction
| Wheel Hardness | 70D durometer polyurethane |
Mechanical Specifications
| Wheel Material | Ultra-Poly 70D polyurethane |
Part Numbers & Compatibility
| OEM Part Number | GWK-1785-LW |
| Compatible With Models | U-Line Model H-1785 |
Frequently Asked Questions
Q: Will GWK-1785-LW fit Uline pallet jacks other than model H-1785?
A: GWK-1785-LW is designed for Uline Model H-1785 (also labeled H1785 or H 1785—all refer to the same unit). It will not fit other Uline models without verification. Check your truck nameplate or parts manual for the exact model code. Wheel hub bore and axle diameter must match; mixing incompatible parts causes wobbling or binding.
Q: What is the advantage of 70D polyurethane over standard 92A wheels?
A: 70D polyurethane is harder and more durable, lasting 30–50% longer under heavy use, rough floors, and extended load cycles. Trade-off: 70D is noisier and rolls with more effort than softer 92A material. Use 70D for cold storage, outdoor concrete, or high-cycle operations where longevity matters more than quiet operation.
Q: Is installation of GWK-1785-LW a simple plug-and-play swap?
A: Yes, if your existing axle is not corroded. Remove the cotter pin or snap ring, slide off the old wheel assembly, install the new bearings and wheels from GWK-1785-LW kit, and secure. Takes 30–60 minutes with basic tools (wrench, bearing puller). If the axle is stuck or shows rust, apply penetrating oil and tap gently with a hammer before attempting removal.
Q: How does GWK-1785-LW perform in cold storage or outdoor environments?
A: 70D Ultra-Poly material resists hardening in cold storage, maintaining flexibility and grip down to 0°F. Sealed bearings prevent ice and moisture intrusion. Monitor bearings monthly in harsh conditions; salt, sand, and corrosive floors accelerate wear. For outdoor use over 6 months per year, schedule wheel inspection every 6 months instead of annually.
Q: What is the expected lifespan of GWK-1785-LW under light-duty warehouse use?
A: Under 1–3 hour daily use on indoor concrete or sealed floors, GWK-1785-LW wheels should last 36–60 months due to the durable 70D durometer. Lifespan shortens with rough floors, high loads, or frequent hot-to-cold transitions. Flat spots or cracks indicate replacement time; continued use risks bearing damage and floor marking.
Q: Are sealed bearings included in GWK-1785-LW, or do I supply my own?
A: GWK-1785-LW includes sealed ball bearings, axles, and fasteners—everything needed for installation. No field greasing required. Bearings are not serviceable; if they fail, replace the entire wheel assembly. Do not reuse old bearings from the previous wheel kit.
