Product Description
GWK-L270DC-LW is a direct replacement load wheel kit for the Vestil L-270-DC manual pallet jack, featuring ultra-polymer 70D load wheels with sealed ball bearings, steel axle, and fastening hardware. Engineered for rear fork installation, the wheels are abrasion-resistant and non-marking, meeting the standard dimensions for Vestil L-270-DC compatibility.
Compatibility: Fits pallet jacks made by Vestil, model L270DC. SKU: GWK-L270DC-LW
Specifications
Material & Construction
| Bearing Material | Chrome steel (AISI 52100 or equivalent) |
Part Numbers
| OEM Part Number | GWK-L270DC-LW |
| Manufacturer Part Number | GWK-L270DC-LW |
| Compatible Equipment Model | Vestil L-270-DC manual pallet truck |
Frequently Asked Questions
Q: Is the GWK-L270DC-LW a direct swap for my Vestil L-270-DC, or do I need to modify the fork?
A: The GWK-L270DC-LW is a direct replacement engineered specifically for rear fork installation on Vestil L-270-DC manual pallet jacks. No modification to the fork assembly is required. The steel axle and sealed ball bearing cartridge bolt directly into the existing mounting points using the provided fastening hardware.
Q: What is the load rating of the GWK-L270DC-LW wheels, and can they handle damp concrete floors?
A: The GWK-L270DC-LW uses ultra-polymer 70D load wheels with the same weight capacity as the original Vestil L-270-DC specification. The 70D durometer rating provides excellent abrasion resistance and non-marking properties on both dry and damp concrete. The sealed ball bearings prevent moisture ingress, making this kit suitable for warehouse and outdoor dock applications.
Q: How do I know if the GWK-L270DC-LW wheels need replacement?
A: Inspect for flat spots, chunking, or visible cracks in the wheel tread. Test the bearings by spinning the wheel by hand; grinding noise or resistance indicates bearing failure. If the jack drifts sideways when rolling empty or under load, the axle may be bent or bearings seized. Replace the entire GWK-L270DC-LW kit if wheels cannot spin freely or show uneven wear.
Q: What tools and how much time do I need to install the GWK-L270DC-LW?
A: You will need a socket set, adjustable wrench, and a block to secure the fork during removal of the old wheels. Expect 30 to 45 minutes per rear fork assembly. Support the jack frame with blocks before removing wheel bolts. Install new wheels hand-tight first, then torque fasteners in a star pattern to prevent binding. Spin each wheel to confirm free rotation before lowering the jack.
Q: Do the sealed ball bearings in the GWK-L270DC-LW require lubrication?
A: No. The sealed ball bearings in the GWK-L270DC-LW are factory-sealed and do not require lubrication during their service life. Do not attempt to disassemble or repack the bearing cartridges. If bearing noise or play develops, replace the entire wheel assembly rather than attempting repair.
Q: Are there any cross-brand equivalents to the GWK-L270DC-LW?
A: The GWK-L270DC-LW is the direct OEM specification for Vestil L-270-DC jacks. If you have a different pallet jack brand or model, confirm your machine model before ordering. Wheel kits are not interchangeable across different jack platforms due to axle diameter, bearing size, and fork mounting geometry differences.