Product Description
Load Wheel Kit (GWK-PM5-LW) for Vestil PM5 and PM6 manual pallet trucks. Includes ultra-polyurethane wheels with 3 inch diameter and 3.75 inch width, ball bearings, axle, and fasteners. Compatible as a direct replacement kit for Vestil PM5 and PM6 models.
Compatibility: Fits pallet jacks made by Vestil, model PM5. SKU: GWK-PM5-LW
Specifications
Material & Construction
| Wheel Material | Ultra-Polyurethane 70D durometer |
| Wheel Hardness | 70D Shore durometer |
Part Numbers
| Manufacturer Part Number | GWK-PM5-LW |
| Cross-Reference Part Numbers | Equivalent to Vestil OEM Load Wheel Kit for PM5, fits PM5 and PM6 models; No additional cross-reference part numbers available |
| Replaces / Supersedes | Replaces Vestil PM5 Load Wheel Kit, supersedes earlier load wheel assemblies for Vestil PM5 and PM6 |
| Compatible Models | Compatible with Vestil PM5 and Vestil PM6 manual pallet trucks |
Frequently Asked Questions
Q: Is the GWK-PM5-LW compatible with both Vestil PM5 and PM6 manual pallet jacks?
A: Yes. The GWK-PM5-LW load wheel kit fits both Vestil PM5 and PM6 manual pallet truck models. This kit is the direct replacement for Vestil OEM load wheel assemblies on both models. Do not assume fit on other manufacturers. Confirm your jack is a Vestil PM5 or PM6 before ordering.
Q: What components are included in the GWK-PM5-LW kit?
A: The GWK-PM5-LW is a complete load wheel kit that includes ultra-polyurethane wheels (3 inch diameter x 3.75 inch width), ball bearings, axle, and fasteners. This is a plug-and-play replacement. You will not need to source bearings or axles separately unless yours are damaged or worn beyond specification.
Q: What wheel dimensions does the GWK-PM5-LW use?
A: The GWK-PM5-LW uses 3 inch diameter x 3.75 inch width polyurethane load wheels. These dimensions are specific to the PM5 and PM6 frame geometry. Do not attempt to fit this kit to other Vestil models unless they explicitly call for 3x3.75 load wheels.
Q: How do I know when my PM5 load wheels need replacement?
A: Signs of wear include visible flat spots, cracks or chunks missing from the wheel face, increased rolling resistance, and difficulty steering. If the wheel is worn 3/8 inch or more below its original 3 inch diameter, replacement is necessary. Manual jacks with worn load wheels become harder to operate and may not maintain level as the jack is pumped.
Q: What tools do I need to install the GWK-PM5-LW kit on a Vestil PM5?
A: You will need a socket set (typically 10mm, 12mm, or 14mm depending on fastener sizes), crescent wrench, and possibly a bearing puller if the old bearing is press-fit. Do not apply heat to remove bearings. Follow the Vestil service manual for your specific PM5 model to avoid damaging the frame or axle boss during disassembly.
Q: What is the maintenance interval for the GWK-PM5-LW kit after installation?
A: Inspect load wheels every 3 months for wear, cracks, and bearing play. Clean wheels monthly to remove floor debris. Manual pallet jacks in continuous warehouse use typically see load wheel replacement every 3 to 5 years depending on floor condition and load patterns. Do not ignore grinding noise from the wheels, as this indicates bearing failure or wheel damage.