Product Description
Professional technical specification for Crown CR 813080-100 Poly Load Wheel Assembly. Industry-standard polyurethane construction, 4-inch outside diameter, 2.17-inch bore, 2.95-inch tread width. No cross-reference or supersession part numbers identified.
Specifications
Material & Construction
| Wheel Composition | Polyurethane ( 95A) |
Part Numbers
| OEM Part Number | CR 813080-100 |
Frequently Asked Questions
Q: What equipment is the CR 813080-100 load wheel compatible with?
A: The CR 813080-100 is an OEM polyurethane load wheel assembly engineered for Crown material handling equipment. Verify your specific equipment model and serial range against Crown documentation. This part number does not have direct cross-reference numbers to other manufacturers, so confirm fitment with your equipment specifications before ordering.
Q: What are the physical specifications of the CR 813080-100?
A: Outside diameter is 4 inches, bore (hub) diameter is 2.17 inches, and tread width is 2.95 inches. The wheel features industry-standard polyurethane construction with 95A durometer hardness bonded to a steel core. These dimensions are critical for axle fitment and must match your equipment before ordering.
Q: What polyurethane durometer rating does this wheel have?
A: The CR 813080-100 uses 95A durometer polyurethane, which is a standard hardness rating for general warehouse and material handling applications. 95A provides balanced grip and wear resistance on typical dry floors. For wet or cold storage environments, higher-traction compounds are recommended.
Q: Is the CR 813080-100 related to the CR 813080-001 series?
A: The CR 813080-100 and CR 813080-001 series (including -A and -XL variants) share identical dimensions, durometer rating, and polyurethane construction. However, no cross-reference or supersession documentation has been identified. Confirm your equipment requirement by part number through Crown documentation rather than assuming interchangeability.
Q: What is the expected service life of the CR 813080-100?
A: In typical warehouse environments, polyurethane 95A wheels last 12 to 24 months before significant wear requires replacement. Service life varies based on floor condition, load weight, and daily usage hours. Inspect wheels regularly for flat spots, cracks, or uneven wear to determine replacement timing.
Q: Does the CR 813080-100 come with bearings?
A: The CR 813080-100 is specified as a load wheel assembly. Confirm bearing configuration and installation status in the product documentation and your equipment manual. Pre-assembled wheels with integral sealed bearings are standard on Crown OEM parts, but verify before ordering to understand mounting requirements.