Product Description
The GW 2400-A poly load wheel assembly is engineered for electric lift trucks, providing superior performance in demanding environments. Its tandem configuration features four precision sealed bearings, ensuring smooth operation and enhanced durability.
Specifications: 3.250 inch diameter x 6.000 inch width (3.250" x 6.000" | 3.25 x 6 wheel | 3-1/4 x 6 | 82.55mm x 152.40mm) | Bearing ID: 25mm (0.984 inch bore | 25.000mm ID)
• Constructed with a robust machined steel hub
• High-durability 95A durometer polyurethane tread
• Compliant with ASTM D2240 standards for quality assurance
This wheel assembly is compatible with select electric pallet jacks and electric stackers, making it an ideal choice for enhancing your material handling equipment.
Specifications
Part Numbers
| Cross-Reference Part Numbers | Equivalent to GP 2400-A, GP2400-A; Also referenced as GW2400-A |
| OEM Part Number | GW 2400-A |
| Manufacturer Part Number | GW 2400-A |
Wheel Dimensions
| Outside Diameter | 3.25 |
| Width Side to Side | 6 |
Frequently Asked Questions
Q: Is the GW 2400-A the same as the GW 2400, and what does the A stand for?
A: The GW 2400-A and GW 2400 are functionally equivalent 95A polyurethane tandem wheels. The A designation often indicates an updated or certified version. Both are 3.250 x 6.000 inches with 25mm bearing bores. Per distributor cross-reference, GW 2400-A also replaces GP 2400-A and GP2400-A.
Q: What is the bearing ID for the GW 2400-A, and how do I verify fit?
A: The GW 2400-A has a 25mm bearing ID (0.984 inch bore). Measure your jack axle stem diameter before ordering. If your stem is 20mm, 30mm, or any size other than 25mm, this wheel will not fit. Always verify the bore size on your current wheel or axle.
Q: Does the GW 2400-A wheel come with four precision bearings as mentioned in the specs?
A: Yes, the GW 2400-A includes four precision sealed ball bearings (two on each wheel in the tandem pair). These bearings are pre-installed and sealed for life. Do not attempt to remove or service them; if a bearing fails, replace the entire wheel assembly.
Q: What is the machined steel hub material, and does it affect durability?
A: The GW 2400-A has a high-strength machined steel hub that provides superior load support and bearing protection compared to cast hubs. The steel hub resists deformation under heavy loads and extends wheel life. This is standard for commercial-duty electric jacks.
Q: Can the GW 2400-A be used to replace worn GW 2400 wheels on my lift truck?
A: Yes, the GW 2400-A is a direct replacement for the GW 2400. Both are 95A polyurethane, 3.250 x 6.000 inch tandem wheels with 25mm bearing IDs. You can swap out all GW 2400 wheels with GW 2400-A units without any modification to your jack.
Q: How long does a GW 2400-A wheel typically last with normal warehouse use?
A: Under normal warehouse conditions (2000 to 4000 lbs capacity jacks, light to moderate duty), a GW 2400-A wheel lasts 12 to 24 months before visible wear requires replacement. Heavy-duty use (8+ hours daily, frequent rough floors) will shorten lifespan to 6 to 12 months. Inspect every 500 operating hours.
