Product Description
The GW 122 Poly Load Wheel Assembly is a high-quality OEM replacement part designed for manual pallet jack front fork support. It features a durable polyurethane tread and sealed bearings, ensuring low-friction operation for enhanced performance and longevity.
Specifications: 3.000 inch diameter x 2.750 inch width (3.000" x 2.750" | 3 x 2.75 wheel | 3 x 2-3/4 | 76.20mm x 69.85mm) | Bearing ID: 20mm (0.787 inch bore | 20.000mm ID)
• High-durability polyurethane tread for extended wear
• Sealed bearings for reduced friction and maintenance
• Designed for optimal performance in manual pallet jacks
This wheel assembly is compatible with select Liftsplus.com manual pallet jack models and various aftermarket equivalents, making it a versatile choice for your equipment needs.
Specifications
Material & Construction
| Wheel Material | Polyurethane tread |
Part Numbers & Compatibility
| Manufacturer Part Number | GW 122 |
| OEM Part Number | GW 122 |
Wheel Dimensions
| Outside Diameter | 3 |
| Width Side to Side | 2.75 |
Frequently Asked Questions
Q: What is the bearing ID and how do I verify compatibility with my manual pallet jack?
A: GW 122 has a 20mm bearing ID (0.787 inch bore). Before ordering, measure your existing wheel bore or check your jack documentation. This 20mm standard is common across most manual pallet jacks, but verify your axle diameter matches. If your jack uses a different bearing size, this wheel will not fit.
Q: What are the exact dimensions and weight capacity of GW 122?
A: GW 122 measures 3.000 inch diameter by 2.750 inch width (76.20mm x 69.85mm). The polyurethane tread is bonded to a sealed bearing core. This wheel is rated for standard manual pallet jack loads, typically 4000 to 5500 lbs total jack capacity depending on your model.
Q: Are there equivalent part numbers or cross-references for GW 122?
A: GW 122 is an OEM part number. Check your manual pallet jack documentation or contact the jack manufacturer to confirm if they use equivalent part numbers. Many aftermarket suppliers stock this wheel under the same GW 122 designation, but always verify part compatibility before purchase.
Q: How do I replace GW 122 on my pallet jack, and what tools do I need?
A: You will need a wrench or socket to fit your axle bolt (typically 14mm to 17mm depending on your jack model). Remove the cotter pin or clip from the axle, unscrew the bolt, and slide the old wheel off. Slide GW 122 onto the axle, reinstall the bolt hand-tight, then secure with a cotter pin. Do not overtighten, as this can damage the sealed bearing.
Q: When should I replace GW 122, and what are signs of wheel failure?
A: Replace GW 122 if you notice flat spots, chunks missing from the tread, squeaking or grinding noises, or if the wheel does not spin freely. The sealed bearing should last 3 to 5 years with normal use. Rough or sticky operation indicates bearing failure and requires replacement.
